{"title":"Chevy Tahoe \/ Suburban Front \u0026 Rear Bumpers","description":"\u003cp\u003eAftermarket front and rear bumpers for the Chevy Tahoe and Suburban. \u003ca href=\"\/collections\/hammerhead-bumpers\"\u003eHammerhead\u003c\/a\u003e and \u003ca href=\"\/collections\/fab-fours-bumpers\"\u003eFab Fours\u003c\/a\u003e anchor the bumper lineup. Ranch Hand and Frontier round it out. Coverage spans four platforms: GMT400 (1992-1999), GMT800 (2000-2006), K2XX (2015-2020), and the current T1XX. Steel builds, bolt-on. Styles run from winch fronts and brush-guard fronts to flush-mount rear steps. Park Assist trucks take sensor-ready fronts. Fit guaranteed, free shipping on every US order. Set your generation from the menu below.\u003c\/p\u003e","products":[{"product_id":"fab-fours-cs15-d3551-1-chevy-suburban-2015-2018-vengeance-front-bumper-no-guard","title":"Fab Fours CS15-D3551-1 Chevy Suburban 2015-2020 Vengeance Front Bumper No Guard","description":"\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Fab Fours Front Bumper Vengeance \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2015-2020 Chevy Suburban\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e: Bumper will not work with Sonar System. Sensors optimized for vehicles with suspension lifts – stock height trucks may require tuning the sensor mount and will require special care.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e: 300 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (L x W x H)\u003c\/strong\u003e: 90 x 42 x 30 in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteel Material\u003c\/strong\u003e: 11 Gauge US Steel\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e: Fab Fours 2 Stage Black Powder Coat\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eFab Fours Vengeance CS15-D3551-1\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOverall design and fit is “High and Tight” to the contours of the vehicle\u003c\/li\u003e\n\u003cli\u003eLower cutout to provide increased airflow\u003c\/li\u003e\n\u003cli\u003eProvides far greater tire clearance\u003c\/li\u003e\n\u003cli\u003eComplete bolt-on front bumper with provided brackets that tie directly to the frame\u003c\/li\u003e\n\u003cli\u003eSensor compatible\u003c\/li\u003e\n\u003cli\u003eAllows for an integrated 20inch Rigid Industries LED light bar in the center (light bar not included)\u003c\/li\u003e\n\u003cli\u003eMounting options on each side for (2) 3×3 Dually lights to give you maximum LED light coverage\u003c\/li\u003e\n\u003cli\u003eSide openings will only accommodate lighting (no side mesh inserts available)\u003c\/li\u003e\n\u003cli\u003eSensors optimized for vehicles with suspension lifts – stock height trucks may require tuning the sensor mount and will require special care.\u003c\/li\u003e\n\u003cli\u003eOptional Center Mesh Insert: M2450-1\u003c\/li\u003e\n\u003cli\u003eCurrently, there is no Side Mesh Insert for this Vengeance Bumper\u003c\/li\u003e\n\u003cli\u003eWill not work with Sonar System\u003c\/li\u003e\n\u003cli\u003eAll optional accessories are sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"Point\"\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"Point\"\u003e\u003c\/ul\u003e\u003ch3\u003eFab Fours Vengeance\u003c\/h3\u003e\n\u003cp\u003eThe Fab Fours Vengeance Series uses a lightweight, high-clearance steel design engineered to reduce overall bumper weight while maintaining solid front-end protection. Its angular profile and tight fitment create a modern off-road look without overwhelming the truck’s factory lines. From our experience, the Vengeance Series is often chosen by owners who want aggressive styling paired with lighter weight.\u003c\/p\u003e","brand":"Fab Fours","offers":[{"title":"Default Title","offer_id":7484028911675,"sku":"CS15-D3551-1","price":2379.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/fab-fours-cs15-d3551-1-chevy-suburban-2015-2018-vengeance-front-bumper-no-guard.jpg?v=1614965940"},{"product_id":"fab-fours-cs15-d3552-1-chevy-suburban-2015-2018-vengeance-front-bumper-with-pre-runner-guard","title":"Fab Fours CS15-D3552-1 Chevy Suburban 2015-2020 Vengeance Front Bumper Pre-Runner Guard","description":"\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Fab Fours Front Bumper Vengeance \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2015-2020 Chevy Suburban\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e: Bumper will not work with Sonar System. Sensors optimized for vehicles with suspension lifts – stock height trucks may require tuning the sensor mount and will require special care.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e: 325 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (L x W x H)\u003c\/strong\u003e: 90 x 42 x 30 in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteel Material\u003c\/strong\u003e: 11 Gauge US Steel\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e: Fab Fours 2 Stage Black Powder Coat\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eFab Fours Vengeance CS15-D3552-1  \u003c\/h2\u003e\n\u003ch3 class=\"Sub\"\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"Point\"\u003e\n\u003cli\u003eOverall design and fit are “High and Tight” to the contours of the vehicle\u003c\/li\u003e\n\u003cli\u003eLower cutout to provide increased airflow\u003c\/li\u003e\n\u003cli\u003eProvides far greater tire clearance\u003c\/li\u003e\n\u003cli\u003eComplete bolt-on front bumper with provided brackets that tie directly to the frame\u003c\/li\u003e\n\u003cli\u003eSensor compatible\u003c\/li\u003e\n\u003cli\u003eAllows for an integrated 20inch Rigid Industries LED light bar in the center (light bar not included)\u003c\/li\u003e\n\u003cli\u003eMounting options on each side for (2) 3×3 Dually lights to give you maximum LED light coverage\u003c\/li\u003e\n\u003cli\u003eSide openings will only accommodate lighting (no side mesh inserts available)\u003c\/li\u003e\n\u003cli\u003eSensors optimized for vehicles with suspension lifts – stock height trucks may require tuning the sensor mount and will require special care.\u003c\/li\u003e\n\u003cli\u003eOptional Center Mesh Insert: M2450-1\u003c\/li\u003e\n\u003cli\u003eCurrently, there is no Side Mesh Insert for this Vengeance Bumper\u003c\/li\u003e\n\u003cli\u003eWill not work with Sonar System\u003c\/li\u003e\n\u003cli\u003eAll optional accessories are sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"Point\"\u003e\u003c\/ul\u003e\u003ch3\u003eFab Fours Vengeance\u003c\/h3\u003e\n\u003cp\u003eThe Fab Fours Vengeance Series uses a lightweight, high-clearance steel design engineered to reduce overall bumper weight while maintaining solid front-end protection. Its angular profile and tight fitment create a modern off-road look without overwhelming the truck’s factory lines. From our experience, the Vengeance Series is often chosen by owners who want aggressive styling paired with lighter weight.\u003c\/p\u003e","brand":"Fab Fours","offers":[{"title":"Default Title","offer_id":7484029206587,"sku":"CS15-D3552-1","price":2569.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/fab-fours-cs15-d3552-1-chevy-suburban-2015-2018-vengeance-front-bumper-with-pre-runner-guard.jpg?v=1614966048"},{"product_id":"ranch-hand-fsc99hbl1-chevy-suburban-and-tahoe-2000-2006-summit-front-bumper","title":"Ranch Hand FSC99HBL1 Chevy Suburban\/Chevy Tahoe 2000-2006 Summit Front Bumper","description":"\u003cp\u003e\u003cstrong\u003eBumper Type\u003c\/strong\u003e: Summit Front Bumper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Ranch Hand Summit Front Bumper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e: FSC99HBL1\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2000-2006 Chevy Suburban\/Chevy Tahoe\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Will not accommodate Z71 fog lights. Will not fit with body lift\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eRanch Hand Summit FSC99HBL1\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e#1 aftermarket bumper brand.\u003c\/li\u003e\n\u003cli\u003eRanch Hand Original's Heavy Duty Style\u003c\/li\u003e\n\u003cli\u003eMaster Crafted from the diamond plate + 4'' schedule 40 pipe, the toughest bumper so far.\u003c\/li\u003e\n\u003cli\u003eImpressive design for both On road and Off road use\u003c\/li\u003e\n\u003cli\u003eUltimate Full Face Front Defense Guard! Maximum wraparound Protection on Headlight.\u003c\/li\u003e\n\u003cli\u003eSuper durable corrosion resistance black powder coating finish.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSuper easy direct bolt on installation, precise fit, no addition cutting or drilling needed.\u003c\/li\u003e\n\u003cli\u003eSturdy one piece fully welded construction, no weak point!\u003c\/li\u003e\n\u003cli\u003e1 year warranty.\u003c\/li\u003e\n\u003cli\u003eMounting Kit and Instructions included\u003c\/li\u003e\n\u003cli\u003eMade in the USA, Texas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDetails:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBumper Weight: 193 Lb\u003c\/li\u003e\n\u003cli\u003eBumper Dimension: 86 x 36 x 37\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\u003ch3\u003eSummit Series\u003c\/h3\u003e\n\u003cp\u003eThe Ranch Hand Summit Series is engineered as a heavy-duty front bumper built for trucks that see hard use both on and off the road. This line emphasizes reinforced steel construction, increased frontal coverage, and compatibility with modern truck features. Summit Series bumpers are aimed at owners who want serious protection paired with a more refined, modern profile suited for both work trucks and off-road builds.\u003c\/p\u003e","brand":"Ranch Hand","offers":[{"title":"Default Title","offer_id":7520389922875,"sku":"FSC99HBL1","price":1744.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/ranch-hand-fsc99hbl1-chevy-avalanch-and-tahoe-2000-2006-summit-front-bumper.jpg?v=1629826781"},{"product_id":"ranch-hand-bbc008bls-2000-2006-chevy-suburban-and-tahoe-horizon-rear-bumper","title":"Ranch Hand BBC008BLS 2000-2006 2500 Chevy Suburban \/ Tahoe \/ Yukon \/ Yukon XL Legend Rear Bumper","description":"\u003cp\u003e\u003cstrong\u003eBumper Type\u003c\/strong\u003e: Legend Back Bumper - 8\",1\/10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Ranch Hand Legend Back Bumper - 8\",1\/10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e: BBC008BLS\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2000-2006 2500 Chevy Suburban \/ Tahoe \/ Yukon \/ Yukon XL\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e: 8\" skirt \/ 1,000 tongue - 10,000 towing - has no backup lights\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e#1 aftermarket bumper brand\u003c\/li\u003e\n\u003cli\u003eConstructed from diamond plate + 4'' schedule 40 pipe, the toughest heavy-duty bumper available on the market.\u003c\/li\u003e\n\u003cli\u003eImpressive design for both On road and Off road use\u003c\/li\u003e\n\u003cli\u003eStable Platform for maximum tow capacity and protection\u003c\/li\u003e\n\u003cli\u003eTested 500\/1000 lb tongue weight and 5000\/10000 lb towing capacity\u003c\/li\u003e\n\u003cli\u003eOptional Bolt on receiver\u003c\/li\u003e\n\u003cli\u003eUltimate vehicle rear protection\u003c\/li\u003e\n\u003cli\u003eCustom-fit to your rig's factory specifications!\u003c\/li\u003e\n\u003cli\u003eSuperior corrosion resistance powder coat finish!\u003c\/li\u003e\n\u003cli\u003eSuper Easy Direct Bold On Installation\u003c\/li\u003e\n\u003cli\u003eCome's with 1 year warranty.\u003c\/li\u003e\n\u003cli\u003eMounting Kit and Instruction included\u003c\/li\u003e\n\u003cli\u003eMade in the USA, Texas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDetails:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBumper Weight: 21 Lb\u003c\/li\u003e\n\u003cli\u003eBumper Dimension: 77 x 18 x 12\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eLegend Series\u003c\/h3\u003e\n\u003cp\u003eThe Ranch Hand Legend Series is built as a full replacement front bumper designed for maximum protection and long-term durability. This line focuses on heavy-duty steel construction, reinforced structure, and a work-ready design that mounts securely to the truck’s frame using heavy-duty brackets. Legend Series bumpers are intended for drivers who rely on their trucks for towing, jobsite use, and demanding conditions, prioritizing strength and coverage over styling extras.\u003c\/p\u003e","brand":"Ranch Hand","offers":[{"title":"Default Title","offer_id":7560007417915,"sku":"BBC008BLS","price":914.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/bbc008bls-1.jpg?v=1620064556"},{"product_id":"hammerhead-600-56-0185t-chevy-suburban-1988-2000-front-bumper-winch-ready-no-brushguard","title":"Hammerhead 600-56-0185S Chevy Suburban 1992-2000 Front Winch Bumper Low Profile","description":"\u003cp\u003e\u003cstrong\u003eStyle:\u003c\/strong\u003e Hammerhead No Brushguard Front Bumper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit:\u003c\/strong\u003e 1992-2000 Chevy Suburban   \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e Due to the vast variety and offerings of the after-market community, we cannot guarantee that our products will work in conjunction with other brands' products. Always be sure to test fit our products to verify fitment with another manufacturer's product before the final installation\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 152 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 90 x 42 x 44 in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteel Material:\u003c\/strong\u003e 3\/16\" Steel Plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Textured Black Powder Coat\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eHammerhead Front Bumper 600-56-0185S\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cdiv class=\"woocommerce-product-details__short-description\"\u003e\n\u003cul\u003e\n\u003cli\u003eHammerhead's front bumpers are designed to be winch capable and stand up to the punishment of on-road and off-road driving.\u003c\/li\u003e\n\u003cli\u003eThis front bumper accommodates up to four 3.25\" x 3.25\" external dimension cube after-market off-road lights in the fog light holes.\u003c\/li\u003e\n\u003cli\u003eThey are made with 3\/16\" thick plate steel and are reinforced to allow for extra strength while keeping the bumpers as light as possible.\u003c\/li\u003e\n\u003cli\u003eThe shackle mounts are a part of the mounting surface to the frame, extending through the bumper, and are welded on the inside and outside of the bumper. \u003c\/li\u003e\n\u003cli\u003eHammerhead Armor prides itself on the fit and finish of every product that we offer. However, due to the vast variety and offerings of the after-market community, we cannot guarantee that our products will work in conjunction with other brands' products. Always be sure to test fit our products to verify fitment with another manufacturer's product before the final installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"woocommerce-product-details__short-description\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\u003ch3\u003eLow Profile\u003c\/h3\u003e\n\u003cp\u003eThe Hammerhead Low Profile Series is built for truck owners who want strong steel protection while maintaining a clean, streamlined front-end appearance. From years of working with Hammerhead bumpers, this design is a popular choice when solid bumper protection is needed without the bulk of larger grille guard setups.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":12815703212091,"sku":"600-56-0185S","price":1934.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/Hammerhead600-56-0185SChevySuburban1992-2000FrontWinchBumperLowProfile_1.jpg?v=1682093524"},{"product_id":"hammerhead-600-56-0127t-chevy-suburban-1988-2000-front-bumper-winch-ready-pre-runner","title":"Hammerhead 600-56-0127T Chevy Suburban 2000 Front Winch Pre-Runner Bumper","description":"\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Hammerhead Front Bumper Pre-Runner\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2000 Chevy Suburban\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e: 235 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e: 3\/16\" Steel Plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e: 2-Stage Black Powder Coat\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eHammerhead Front Bumper 600-56-0127T\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cdiv class=\"woocommerce-product-details__short-description\"\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to be winch capable and stand up to the punishment of on-road and off-road driving\u003c\/li\u003e\n\u003cli\u003eAccommodates up to four 3.25″ x 3.25″ external dimension cube after-market off-road lights in the fog light holes and up to four additional lights on the pre-runner brush guard\u003c\/li\u003e\n\u003cli\u003eReinforced to allow for extra strength while keeping the bumper as light as possible\u003c\/li\u003e\n\u003cli\u003eThe shackle mounts are a part of the mounting surface to the frame, extending through the bumper, and are welded on the inside and outside of the bumper\u003c\/li\u003e\n\u003cli\u003eThe pre-runner style brush guard is made with 1.75″ x 0.120″ wall tubing\u003c\/li\u003e\n\u003cli\u003eFits the 1500 body style Tahoe\/Suburban\/Yukon\u003c\/li\u003e\n\u003cli\u003eVerified to work with the following Warn winches: VR8000 and M8000\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\u003ch3\u003ePre-Runner\u003c\/h3\u003e\n\u003cp\u003eThe Hammerhead Pre-Runner Series is designed to deliver aggressive off-road styling with added protection for trucks used for off-road and trail driving. Featuring a distinctive tubular guard design and reinforced steel construction, Pre-Runner bumpers offer added durability while maintaining a lighter, high-clearance structure.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":12815703277627,"sku":"600-56-0127S","price":2060.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/Hammerhead600-56-0127TChevySuburban2000FrontWinchPre-RunnerBumper_1.jpg?v=1681291194"},{"product_id":"hammerhead-600-56-0110t-chevy-suburban-2001-2006-front-bumper-winch-ready-full-brushguard","title":"Hammerhead 600-56-0110S Chevy Suburban 2001-2006 Front Winch Bumper with Full Brush Guard","description":"\u003cp\u003e\u003cstrong\u003eStyle:\u003c\/strong\u003e Hammerhead X-Series Full Brushguard Front Bumper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit:\u003c\/strong\u003e 2001-2006 Chevy Suburban\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e OEM low speed impact guards will need to be trimmed for some winches. Due to the vast variety of offerings and sizes of aftermarket fender flares, we cannot guarantee that the outer tubes of our full brush guard bumpers will allow for over-sized fender flares to be installed on a vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 214 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 90 x 42 x 44 in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteel Material:\u003c\/strong\u003e 3\/16\" Steel Plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Textured Black Powder Coat\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eHammerhead Front Bumper 600-56-0110S\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHammerhead's front bumpers are designed to be winch capable and stand up to the punishment of on-road and off-road driving.\u003c\/li\u003e\n\u003cli\u003eThis front bumper accommodates up to four 3.5\" square after-market off-road lights.\u003c\/li\u003e\n\u003cli\u003eThey are made with 3\/16\" thick plate steel and are reinforced to allow for extra strength while keeping the bumpers as light as possible.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe shackle mounts are a part of the mounting surface to the frame, extending through the bumper, and are welded on the inside and outside of the bumper.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe X-series style brush guard is made with 1.75\" x 0.120\" wall tubing.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNOTE\u003c\/strong\u003e: OEM low-speed impact guards will need to be trimmed for some winches.\u003c\/li\u003e\n\u003cli\u003eHammerhead Armor prides itself on the fit and finish of every product that we offer. However, due to the vast variety of offerings and sizes of after-market fender flares, we cannot guarantee that the outer tubes of our Full Brush Guard bumpers will allow for oversized fender flares to be installed on a vehicle. Always be sure to test fit our products to verify fitment with another manufacturer's product before the final installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":12815703310395,"sku":"600-56-0110S","price":2573.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/Hammerhead-600-56-0110S-Chevy-Suburban-2001-2006-X-Series-Front-Winch-Bumper-Full-Brushguard.jpg?v=1681299374"},{"product_id":"hammerhead-600-56-0131t-chevy-suburban-2001-2006-front-bumper-winch-ready-no-brushguard","title":"Hammerhead 600-56-0131S Chevy Suburban 2001-2006 Front Winch Bumper Low Profile","description":"\u003cp\u003e\u003cstrong\u003eStyle:\u003c\/strong\u003e Hammerhead No Brushguard Front Bumper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit:\u003c\/strong\u003e 2001-2006 Chevy Suburban  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e OEM low-speed impact guards will need to be trimmed for some winches. Due to the vast variety and offerings of the after-market community, we cannot guarantee that our products will work in conjunction with other brands' products. Always be sure to test fit our products to verify fitment with another manufacturer's product before the final installation\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 174 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 90 x 42 x 44 in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteel Material:\u003c\/strong\u003e 3\/16\" Steel Plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Textured Black Powder Coat\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eHammerhead Front Bumper 600-56-0131T\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHammerhead's front bumpers are designed to be winch capable and stand up to the punishment of on-road and off-road driving. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThis front bumper accommodates up to four 3.5\" square after-market off-road fog lights.\u003c\/li\u003e\n\u003cli\u003eThey are made with 3\/16\" thick plate steel and are reinforced to allow for extra strength while keeping the bumpers as light as possible.\u003c\/li\u003e\n\u003cli\u003eThe shackle mounts are a part of the mounting surface to the frame, extending through the bumper, and are welded on the inside and outside of the bumper. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNOTE\u003c\/strong\u003e: OEM low-speed impact guards will need to be trimmed for some winches. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHammerhead Armor prides itself on the fit and finish of every product that we offer. However, due to the vast variety and offerings of the after-market community, we cannot guarantee that our products will work in conjunction with other brands' products. Always be sure to test fit our products to verify fitment with another manufacturer's product before the final installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\u003ch3\u003eLow Profile\u003c\/h3\u003e\n\u003cp\u003eThe Hammerhead Low Profile Series is built for truck owners who want strong steel protection while maintaining a clean, streamlined front-end appearance. From years of working with Hammerhead bumpers, this design is a popular choice when solid bumper protection is needed without the bulk of larger grille guard setups.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":12815703343163,"sku":"600-56-0131S","price":1934.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/Hammerhead600-56-0131SChevySuburban2001-2006FrontWinchBumperLowProfile_1.jpg?v=1682094128"},{"product_id":"hammerhead-600-56-0130t-chevy-suburban-2001-2006-front-bumper-winch-ready-pre-runner","title":"Hammerhead 600-56-0130S Chevy Suburban 2001-2006 Front Winch Bumper Pre-Runner","description":"\u003cp\u003e\u003cstrong\u003eStyle:\u003c\/strong\u003e Hammerhead Pre-Runner Front Bumper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit:\u003c\/strong\u003e 2001-2006 Chevy Suburban\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e OEM low-speed impact guards will need to be trimmed for some winches. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 189 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 90 x 42 x 44 in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteel Material:\u003c\/strong\u003e 3\/16\" Steel Plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Textured Black Powder Coat\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eHammerhead Front Bumper 600-56-0130T\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHammerhead's front bumpers are designed to be winch capable and stand up to the punishment of on-road and off-road driving.\u003c\/li\u003e\n\u003cli\u003eThis front bumper accommodates up to four 3.5\" square after-market off-road fog lights, as well as lights on the pre-runner bar.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThey are made with 3\/16\" thick plate steel and are reinforced to allow for extra strength while keeping the bumpers as light as possible.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe shackle mounts are a part of the mounting surface to the frame, extending through the bumper, and are welded on the inside and outside of the bumper.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe pre-runner style brush guard is made with 1.75\" x 0.120\" wall tubing.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNOTE\u003c\/strong\u003e: OEM low-speed impact guards will need to be trimmed for some winches.\u003c\/li\u003e\n\u003cli\u003eHammerhead Armor prides itself on the fit and finish of every product that we offer. However, due to the vast variety and offerings of the after-market community, we cannot guarantee that our products will work in conjunction with other brands' products. Always be sure to test fit our products to verify fitment with another manufacturer's product before the final installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\u003ch3\u003ePre-Runner\u003c\/h3\u003e\n\u003cp\u003eThe Hammerhead Pre-Runner Series is designed to deliver aggressive off-road styling with added protection for trucks used for off-road and trail driving. Featuring a distinctive tubular guard design and reinforced steel construction, Pre-Runner bumpers offer added durability while maintaining a lighter, high-clearance structure.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":12815703375931,"sku":"600-56-0130S","price":2060.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/Hammerhead600-56-0130SChevySuburban2001-2006FrontWinchBumperPre-Runner_1.jpg?v=1682094750"},{"product_id":"hammerhead-600-56-0185t-chevy-tahoe-1988-2000-front-bumper-winch-ready-no-brushguard","title":"Hammerhead 600-56-0185T Chevy Tahoe 1992-2000 Front Winch Bumper Low Profile","description":"\u003cp\u003e\u003cstrong\u003eStyle:\u003c\/strong\u003e Hammerhead No Brushguard Front Bumper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit:\u003c\/strong\u003e 1992-2000 Chevy Tahoe  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e Due to the vast variety and offerings of the after-market community, we cannot guarantee that our products will work in conjunction with other brands' products. Always be sure to test fit our products to verify fitment with another manufacturer's product before the final installation\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 152 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 90 x 42 x 44 in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteel Material:\u003c\/strong\u003e 3\/16\" Steel Plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Textured Black Powder Coat\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eHammerhead Front Bumper 600-56-0185T\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cdiv class=\"woocommerce-product-details__short-description\"\u003e\n\u003cul\u003e\n\u003cli\u003eHammerhead's front bumpers are designed to be winch capable and stand up to the punishment of on-road and off-road driving.\u003c\/li\u003e\n\u003cli\u003eThis front bumper accommodates up to four 3.25\" x 3.25\" external dimension cube after-market off-road lights in the fog light holes.\u003c\/li\u003e\n\u003cli\u003eThey are made with 3\/16\" thick plate steel and are reinforced to allow for extra strength while keeping the bumpers as light as possible.\u003c\/li\u003e\n\u003cli\u003eThe shackle mounts are a part of the mounting surface to the frame, extending through the bumper, and are welded on the inside and outside of the bumper. \u003c\/li\u003e\n\u003cli\u003eHammerhead Armor prides itself on the fit and finish of every product that we offer. However, due to the vast variety and offerings of the after-market community, we cannot guarantee that our products will work in conjunction with other brands' products. Always be sure to test fit our products to verify fitment with another manufacturer's product before the final installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\u003ch3\u003eLow Profile\u003c\/h3\u003e\n\u003cp\u003eThe Hammerhead Low Profile Series is built for truck owners who want strong steel protection while maintaining a clean, streamlined front-end appearance. From years of working with Hammerhead bumpers, this design is a popular choice when solid bumper protection is needed without the bulk of larger grille guard setups.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":12815703441467,"sku":"600-56-0185T","price":1934.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/Hammerhead600-56-0185TChevyTahoe1992-2000FrontWinchBumperLowProfile_1.jpg?v=1682093426"},{"product_id":"hammerhead-600-56-0127t-chevy-tahoe-1988-2000-front-bumper-winch-ready-pre-runner","title":"Hammerhead 600-56-0127T Chevy Tahoe 1998-2000 Front Winch Pre-Runner Bumper","description":"\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Hammerhead Front Bumper Pre-Runner\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 1998-2000 Chevy Tahoe\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e: 235 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e: 3\/16\" Steel Plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e: 2-Stage Black Powder Coat\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eHammerhead Front Bumper 600-56-0127T\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cdiv class=\"woocommerce-product-details__short-description\"\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to be winch capable and stand up to the punishment of on-road and off-road driving\u003c\/li\u003e\n\u003cli\u003eAccommodates up to four 3.25″ x 3.25″ external dimension cube after-market off-road lights in the fog light holes and up to four additional lights on the pre-runner brush guard\u003c\/li\u003e\n\u003cli\u003eReinforced to allow for extra strength while keeping the bumper as light as possible\u003c\/li\u003e\n\u003cli\u003eThe shackle mounts are a part of the mounting surface to the frame, extending through the bumper, and are welded on the inside and outside of the bumper\u003c\/li\u003e\n\u003cli\u003eThe pre-runner style brush guard is made with 1.75″ x 0.120″ wall tubing\u003c\/li\u003e\n\u003cli\u003eFits the 1500 body style Tahoe\/Suburban\/Yukon\u003c\/li\u003e\n\u003cli\u003eVerified to work with the following Warn winches: VR8000 and M8000\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\u003ch3\u003ePre-Runner\u003c\/h3\u003e\n\u003cp\u003eThe Hammerhead Pre-Runner Series is designed to deliver aggressive off-road styling with added protection for trucks used for off-road and trail driving. Featuring a distinctive tubular guard design and reinforced steel construction, Pre-Runner bumpers offer added durability while maintaining a lighter, high-clearance structure.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":12815703474235,"sku":"600-56-0127T","price":2060.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/Hammerhead600-56-0127TChevyTahoe1998-2000FrontWinchPre-RunnerBumper_1.jpg?v=1681291069"},{"product_id":"hammerhead-600-56-0110t-chevy-tahoe-2001-2006-front-bumper-winch-ready-full-brushguard","title":"Hammerhead 600-56-0110T Chevy Tahoe 2001-2006 Front Winch Bumper with Full Brush Guard","description":"\u003cp\u003e\u003cstrong\u003eStyle:\u003c\/strong\u003e Hammerhead X-Series Full Brushguard Front Bumper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit:\u003c\/strong\u003e 2001-2006 Chevy Suburban\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e OEM low speed impact guards will need to be trimmed for some winches. Due to the vast variety of offerings and sizes of aftermarket fender flares, we cannot guarantee that the outer tubes of our full brush guard bumpers will allow for over-sized fender flares to be installed on a vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 214 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 90 x 42 x 44 in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteel Material:\u003c\/strong\u003e 3\/16\" Steel Plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Textured Black Powder Coat\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eHammerhead Front Bumper 600-56-0110S\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHammerhead's front bumpers are designed to be winch capable and stand up to the punishment of on-road and off-road driving.\u003c\/li\u003e\n\u003cli\u003eThis front bumper accommodates up to four 3.5\" square after-market off-road lights.\u003c\/li\u003e\n\u003cli\u003eThey are made with 3\/16\" thick plate steel and are reinforced to allow for extra strength while keeping the bumpers as light as possible.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe shackle mounts are a part of the mounting surface to the frame, extending through the bumper, and are welded on the inside and outside of the bumper.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe X-series style brush guard is made with 1.75\" x 0.120\" wall tubing.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNOTE\u003c\/strong\u003e: OEM low-speed impact guards will need to be trimmed for some winches.\u003c\/li\u003e\n\u003cli\u003eHammerhead Armor prides itself on the fit and finish of every product that we offer. However, due to the vast variety of offerings and sizes of after-market fender flares, we cannot guarantee that the outer tubes of our Full Brush Guard bumpers will allow for oversized fender flares to be installed on a vehicle. Always be sure to test fit our products to verify fitment with another manufacturer's product before the final installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":12815703507003,"sku":"600-56-0110T","price":2573.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/Hammerhead-600-56-0110T-Chevy-Tahoe-2001-2006-X-Series-Front-Winch-Bumper-Full-Brushguard.jpg?v=1681299355"},{"product_id":"hammerhead-600-56-0131t-chevy-tahoe-2001-2006-front-bumper-winch-ready-no-brushguard","title":"Hammerhead 600-56-0131T Chevy Tahoe 2001-2006 Front Winch Bumper Low Profile","description":"\u003cp\u003e\u003cstrong\u003eStyle:\u003c\/strong\u003e Hammerhead No Brushguard Front Bumper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit:\u003c\/strong\u003e 2001-2006 Chevy Tahoe  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e OEM low-speed impact guards will need to be trimmed for some winches. Due to the vast variety and offerings of the after-market community, we cannot guarantee that our products will work in conjunction with other brands' products. Always be sure to test fit our products to verify fitment with another manufacturer's product before the final installation\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 174 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 90 x 42 x 44 in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteel Material:\u003c\/strong\u003e 3\/16\" Steel Plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Textured Black Powder Coat\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eHammerhead Front Bumper 600-56-0131T\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHammerhead's front bumpers are designed to be winch capable and stand up to the punishment of on-road and off-road driving.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThis front bumper accommodates up to four 3.5\" square after-market off-road fog lights.\u003c\/li\u003e\n\u003cli\u003eThey are made with 3\/16\" thick plate steel and are reinforced to allow for extra strength while keeping the bumpers as light as possible.\u003c\/li\u003e\n\u003cli\u003eThe shackle mounts are a part of the mounting surface to the frame, extending through the bumper, and are welded on the inside and outside of the bumper.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNOTE\u003c\/strong\u003e: OEM low-speed impact guards will need to be trimmed for some winches.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHammerhead Armor prides itself on the fit and finish of every product that we offer. However, due to the vast variety and offerings of the after-market community, we cannot guarantee that our products will work in conjunction with other brands' products. Always be sure to test fit our products to verify fitment with another manufacturer's product before the final installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\u003ch3\u003eLow Profile\u003c\/h3\u003e\n\u003cp\u003eThe Hammerhead Low Profile Series is built for truck owners who want strong steel protection while maintaining a clean, streamlined front-end appearance. From years of working with Hammerhead bumpers, this design is a popular choice when solid bumper protection is needed without the bulk of larger grille guard setups.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":12815703539771,"sku":"600-56-0131T","price":1934.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/Hammerhead600-56-0131TChevyTahoe2001-2006FrontWinchBumperLowProfile_1.jpg?v=1682094485"},{"product_id":"hammerhead-600-56-0130t-chevy-tahoe-2001-2006-front-bumper-winch-ready-pre-runner","title":"Hammerhead 600-56-0130T Chevy Tahoe 2001-2006 Front Winch Bumper Pre-Runner","description":"\u003cp\u003e\u003cstrong\u003eStyle:\u003c\/strong\u003e Hammerhead Pre-Runner Front Bumper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit:\u003c\/strong\u003e 2001-2006 Chevy Tahoe\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e OEM low-speed impact guards will need to be trimmed for some winches. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 189 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 90 x 42 x 44 in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteel Material:\u003c\/strong\u003e 3\/16\" Steel Plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Textured Black Powder Coat\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eHammerhead Front Bumper 600-56-0130T\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHammerhead's front bumpers are designed to be winch capable and stand up to the punishment of on-road and off-road driving.\u003c\/li\u003e\n\u003cli\u003eThis front bumper accommodates up to four 3.5\" square after-market off-road fog lights, as well as lights on the pre-runner bar.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThey are made with 3\/16\" thick plate steel and are reinforced to allow for extra strength while keeping the bumpers as light as possible.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe shackle mounts are a part of the mounting surface to the frame, extending through the bumper, and are welded on the inside and outside of the bumper.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe pre-runner style brush guard is made with 1.75\" x 0.120\" wall tubing.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNOTE\u003c\/strong\u003e: OEM low-speed impact guards will need to be trimmed for some winches.\u003c\/li\u003e\n\u003cli\u003eHammerhead Armor prides itself on the fit and finish of every product that we offer. However, due to the vast variety and offerings of the after-market community, we cannot guarantee that our products will work in conjunction with other brands' products. Always be sure to test fit our products to verify fitment with another manufacturer's product before the final installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\u003ch3\u003ePre-Runner\u003c\/h3\u003e\n\u003cp\u003eThe Hammerhead Pre-Runner Series is designed to deliver aggressive off-road styling with added protection for trucks used for off-road and trail driving. Featuring a distinctive tubular guard design and reinforced steel construction, Pre-Runner bumpers offer added durability while maintaining a lighter, high-clearance structure.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":12815703605307,"sku":"600-56-0130T","price":2060.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/Hammerhead600-56-0130TChevyTahoe2001-2006FrontWinchBumperPre-Runner_1.jpg?v=1682094735"},{"product_id":"hammerhead-600-56-0653-chevy-suburban-1992-1999-rear-bumper-flush-mount","title":"Hammerhead 600-56-0653 Chevy Suburban 1992-1999 Flush Mount Rear Bumper","description":"\u003cp\u003e\u003cstrong\u003eStyle:\u003c\/strong\u003e Hammerhead Rear Bumper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit:\u003c\/strong\u003e 1992-1999 Chevy Suburban\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e ONLY fits the 1500 body styles. All rear bumpers include tag lights (unless OEM tag lights are used) and shackle mounts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 97 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 90 x 21 x 20 in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteel Material:\u003c\/strong\u003e 1\/4\" Steel Plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Textured Black Powder Coat\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eHammerhead Rear Bumper 600-56-0653\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHammerhead's rear bumpers are designed to stand up to the punishment of on-road and off-road driving.\u003c\/li\u003e\n\u003cli\u003eThey are made with 1\/4\" thick plate steel and are reinforced to allow for extra strength while keeping the bumpers as light as possible.\u003c\/li\u003e\n\u003cli\u003eAll rear bumpers include reverse lights and tag lights, steps, and shackle mounts.\u003c\/li\u003e\n\u003cli\u003eThe shackle mounts are a part of the mounting surface to the frame, extending through the bumper, and are welded on the inside and outside of the bumper.\u003c\/li\u003e\n\u003cli\u003eOptional flush mount LED lights are available for purchase.\u003c\/li\u003e\n\u003cli\u003eONLY fits the 1500 body styles.\u003c\/li\u003e\n\u003cli\u003eHammerhead Armor prides itself on the fit and finish of every product that we offer. However, due to the vast variety and offerings of the after-market community, we cannot guarantee that our products will work in conjunction with other brands’ products. Always be sure to test fit our products to verify fitment with another manufacturer’s product before the final installation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":12850139430971,"sku":"600-56-0653","price":1547.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/files\/Hammerhead600-56-0653ChevySuburban1992-1999FlushMountRearBumper_1.jpg?v=1682613120"},{"product_id":"hammerhead-600-56-0202s-chevy-suburban-2000-2006-rear-bumper","title":"Hammerhead 600-56-0202S Chevy Suburban 2000-2006 Rear Bumper","description":"\u003cp\u003e\u003cstrong\u003eStyle:\u003c\/strong\u003e Hammerhead Rear Bumper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit:\u003c\/strong\u003e 2000-2006 Chevy Suburban\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e All rear bumpers include tag lights (unless OEM tag lights are used) and shackle mounts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 147 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 90 x 21 x 20 in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteel Material:\u003c\/strong\u003e 1\/4\" Steel Plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Textured Black Powder Coat\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eHammerhead Rear Bumper 600-56-0202S\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHammerhead's rear bumpers are designed to stand up to the punishment of on-road and off-road driving.\u003c\/li\u003e\n\u003cli\u003eThey are made with 1\/4\" thick plate steel and are reinforced to allow for extra strength while keeping the bumpers as light as possible.\u003c\/li\u003e\n\u003cli\u003eAll rear bumpers include reverse lights and tag lights, steps, and shackle mounts.\u003c\/li\u003e\n\u003cli\u003eThe shackle mounts are a part of the mounting surface to the frame, extending through the bumper, and are welded on the inside and outside of the bumper.\u003c\/li\u003e\n\u003cli\u003eOptional upgraded LED lights are available for purchase.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHammerhead Armor prides itself on the fit and finish of every product that we offer. However, due to the vast variety and offerings of the after-market community, we cannot guarantee that our products will work in conjunction with other brands’ products. Always be sure to test fit our products to verify fitment with another manufacturer’s product before the final installation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":12850139463739,"sku":"600-56-0202S","price":1547.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/files\/Hammerhead600-56-0202SChevySuburban2000-2006RearBumper_1.jpg?v=1682613619"},{"product_id":"hammerhead-600-56-0531s-chevy-suburban-2000-2006-rear-bumper-flush-mount","title":"Hammerhead 600-56-0531S Chevy Suburban 2000-2006 Flush Mount Rear Bumper","description":"\u003cp\u003e\u003cstrong\u003eStyle:\u003c\/strong\u003e Hammerhead Rear Bumper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit:\u003c\/strong\u003e 2000-2006 Chevy Suburban\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e All rear bumpers include tag lights (unless OEM tag lights are used) and shackle mounts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 117 lbs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 90 x 21 x 20 in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteel Material:\u003c\/strong\u003e 1\/4\" Steel Plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Textured Black Powder Coat\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eHammerhead Rear Bumper 600-56-0531S\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHammerhead's rear bumpers are designed to stand up to the punishment of on-road and off-road driving.\u003c\/li\u003e\n\u003cli\u003eThey are made with 1\/4\" thick plate steel and are reinforced to allow for extra strength while keeping the bumpers as light as possible.\u003c\/li\u003e\n\u003cli\u003eAll rear bumpers include tag lights, steps, and shackle mounts.\u003c\/li\u003e\n\u003cli\u003eThe shackle mounts are a part of the mounting surface to the frame, extending through the bumper, and are welded on the inside and outside of the bumper.\u003c\/li\u003e\n\u003cli\u003eOptional flush mount LED lights are available for purchase.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHammerhead Armor prides itself on the fit and finish of every product that we offer. However, due to the vast variety and offerings of the after-market community, we cannot guarantee that our products will work in conjunction with other brands’ products. Always be sure to test fit our products to verify fitment with another manufacturer’s product before the final installation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":12850139529275,"sku":"600-56-0531S","price":1547.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/files\/Hammerhead600-56-0531SChevySuburban2000-2006FlushMountRearBumper_1.jpg?v=1682527818"},{"product_id":"hammerhead-600-56-0653-chevy-tahoe-1992-1999-rear-bumper-flush-mount","title":"Hammerhead 600-56-0653 Chevy Tahoe 1992-1999 Flush Mount Rear Bumper","description":"\u003cp\u003e\u003cstrong\u003eStyle:\u003c\/strong\u003e Hammerhead Rear Bumper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit:\u003c\/strong\u003e 1992-1999 Chevy Tahoe \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e ONLY fits the 1500 body styles. All rear bumpers include tag lights (unless OEM tag lights are used) and shackle mounts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 97 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 90 x 21 x 20 in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteel Material:\u003c\/strong\u003e 1\/4\" Steel Plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Textured Black Powder Coat\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eHammerhead Rear Bumper 600-56-0653\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHammerhead's rear bumpers are designed to stand up to the punishment of on-road and off-road driving.\u003c\/li\u003e\n\u003cli\u003eThey are made with 1\/4\" thick plate steel and are reinforced to allow for extra strength while keeping the bumpers as light as possible.\u003c\/li\u003e\n\u003cli\u003eAll rear bumpers include reverse lights and tag lights, steps, and shackle mounts.\u003c\/li\u003e\n\u003cli\u003eThe shackle mounts are a part of the mounting surface to the frame, extending through the bumper, and are welded on the inside and outside of the bumper.\u003c\/li\u003e\n\u003cli\u003eOptional flush mount LED lights are available for purchase\u003c\/li\u003e\n\u003cli\u003eONLY fits the 1500 body styles\u003c\/li\u003e\n\u003cli\u003eHammerhead Armor prides itself on the fit and finish of every product that we offer. However, due to the vast variety and offerings of the after-market community, we cannot guarantee that our products will work in conjunction with other brands’ products. Always be sure to test fit our products to verify fitment with another manufacturer’s product before the final installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":12850139594811,"sku":"600-56-0653","price":1547.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/files\/Hammerhead600-56-0653ChevyTahoe1992-1999FlushMountRearBumper_1.jpg?v=1682613242"},{"product_id":"hammerhead-600-56-0202t-chevy-tahoe-2000-2006-rear-bumper","title":"Hammerhead 600-56-0202T Chevy Tahoe 2000-2006 Rear Bumper","description":"\u003cp\u003e\u003cstrong\u003eStyle:\u003c\/strong\u003e Hammerhead Rear Bumper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit:\u003c\/strong\u003e 2000-2006 Chevy Tahoe \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e All rear bumpers include tag lights (unless OEM tag lights are used) and shackle mounts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 147 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 90 x 21 x 20 in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteel Material:\u003c\/strong\u003e 1\/4\" Steel Plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Textured Black Powder Coat\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eHammerhead Rear Bumper 600-56-0202T\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHammerhead's rear bumpers are designed to stand up to the punishment of on-road and off-road driving.\u003c\/li\u003e\n\u003cli\u003eThey are made with 1\/4\" thick plate steel and are reinforced to allow for extra strength while keeping the bumpers as light as possible.\u003c\/li\u003e\n\u003cli\u003eAll rear bumpers include reverse lights and tag lights, steps, and shackle mounts.\u003c\/li\u003e\n\u003cli\u003eThe shackle mounts are a part of the mounting surface to the frame, extending through the bumper, and are welded on the inside and outside of the bumper.\u003c\/li\u003e\n\u003cli\u003eOptional upgraded LED lights are available for purchase.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHammerhead Armor prides itself on the fit and finish of every product that we offer. However, due to the vast variety and offerings of the after-market community, we cannot guarantee that our products will work in conjunction with other brands’ products. Always be sure to test fit our products to verify fitment with another manufacturer’s product before the final installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":12850139627579,"sku":"600-56-0202T","price":1547.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/files\/Hammerhead600-56-0202TChevyTahoe2000-2006RearBumper_1.jpg?v=1682613600"},{"product_id":"hammerhead-600-56-0531t-chevy-tahoe-2000-2006-rear-bumper-flush-mount","title":"Hammerhead 600-56-0531T Chevy Tahoe 2000-2006 Flush Mount Rear Bumper","description":"\u003cp\u003e\u003cstrong\u003eStyle:\u003c\/strong\u003e Hammerhead Rear Bumper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit:\u003c\/strong\u003e 2000-2006 Chevy Tahoe\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e All rear bumpers include tag lights (unless OEM tag lights are used) and shackle mounts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 117 lbs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 90 x 21 x 20 in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteel Material:\u003c\/strong\u003e 1\/4\" Steel Plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Textured Black Powder Coat\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eHammerhead Rear Bumper 600-56-0531T\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHammerhead's rear bumpers are designed to stand up to the punishment of on-road and off-road driving.\u003c\/li\u003e\n\u003cli\u003eThey are made with 1\/4\" thick plate steel and are reinforced to allow for extra strength while keeping the bumpers as light as possible.\u003c\/li\u003e\n\u003cli\u003eAll rear bumpers include tag lights, steps, and shackle mounts.\u003c\/li\u003e\n\u003cli\u003eThe shackle mounts are a part of the mounting surface to the frame, extending through the bumper, and are welded on the inside and outside of the bumper.\u003c\/li\u003e\n\u003cli\u003eOptional flush mount LED lights are available for purchase.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHammerhead Armor prides itself on the fit and finish of every product that we offer. However, due to the vast variety and offerings of the after-market community, we cannot guarantee that our products will work in conjunction with other brands’ products. Always be sure to test fit our products to verify fitment with another manufacturer’s product before the final installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":12850139660347,"sku":"600-56-0531T","price":1547.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/files\/Hammerhead600-56-0531TChevyTahoe2000-2006FlushMountRearBumper_1.jpg?v=1682527801"},{"product_id":"fab-fours-cs15-f3550-1-2015-2018-chevy-tahoe-suburban-1500-premium-front-bumper","title":"Fab Fours CS15-F3550-1 Chevy Suburban 2015-2020 Premium Front Bumper Sensor Winch Ready Full Guard","description":"\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Fab Fours Front Bumper Premium\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2015-2020 Chevy Suburban\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e: Blind Spot Monitoring and Lane Departure system will not work. Will not work with Sonar System\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e: 350 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (L x W x H)\u003c\/strong\u003e: 90 x 42 x 47 in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteel Material\u003c\/strong\u003e: 3\/16″ US Steel\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e: Fab Fours 2 Stage Black Powder Coat\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eFab Fours Premium CS15-F3550-1\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides far more tire clearance\u003c\/li\u003e\n\u003cli\u003eWinch Ready – Accepts up to 12,000 lb. winches or smaller\u003c\/li\u003e\n\u003cli\u003e1″ D-Ring mounts\u003c\/li\u003e\n\u003cli\u003e2-piece mounting system with adjustability to allow a “custom” fit\u003c\/li\u003e\n\u003cli\u003eFab Fours signature injection molded light housings\u003c\/li\u003e\n\u003cli\u003eFab Fours’ 90mm fog and 60mm turn indicator lights are included FREE with the bumper\u003c\/li\u003e\n\u003cli\u003eSensors may read shackles or hooks protruding from the fairlead.\u003c\/li\u003e\n\u003cli\u003eAll sensor testing is done on lifted trucks\u003c\/li\u003e\n\u003cli\u003e*Will not work with Sonar System\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\u003ch3\u003eFab Fours Premium\u003c\/h3\u003e\n\u003cp\u003eThe Fab Fours Premium Series includes fully featured steel bumpers designed for demanding off-road use. These bumpers combine reinforced construction with integrated grille guards, winch compatibility, and accessory mounting points. Designed for demanding off-road use as well as work-ready trucks, the Premium line focuses on strength, protection, and high-end aftermarket styling.\u003c\/p\u003e","brand":"Fab Fours","offers":[{"title":"Default Title","offer_id":19644621324347,"sku":"CS15-F3550-1","price":3729.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/1500_size_template_crop_0021_CS15-F3550-1_jpg_1200x_92bc2068-8971-4c9d-bac0-8c871f7d0618.jpg?v=1629829719"},{"product_id":"fab-fours-cs15-f3551-1-chevy-tahoe-suburban-2015-2018-premium-front-bumper-sensor-winch-ready-with-no-guard","title":"Fab Fours CS15-F3551-1 Chevy Suburban 2015-2020 Premium Front Bumper Sensor Winch Ready No Guard","description":"\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Fab Fours Front Bumper Premium\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2015-2020 Chevy Suburban\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e: Blind Spot Monitoring and Lane Departure system will not work. Will not work with Sonar System\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e: 300 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (L x W x H)\u003c\/strong\u003e: 90 x 42 x 27 in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteel Material\u003c\/strong\u003e: 3\/16″ US Steel\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e: Fab Fours 2 Stage Black Powder Coat\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eFab Fours Premium CS15-F3551-1\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eProvides far more tire clearance\u003c\/li\u003e\n\u003cli\u003eWinch Ready – Accepts up to 12,000 lb. winches or smaller\u003c\/li\u003e\n\u003cli\u003e1″ D-Ring mounts\u003c\/li\u003e\n\u003cli\u003e2-piece mounting system with adjustability to allow a “custom” fit\u003c\/li\u003e\n\u003cli\u003eFab Fours signature injection molded light housings\u003c\/li\u003e\n\u003cli\u003eFab Fours’ 90mm fog and 60mm turn indicator lights are included FREE with the bumper\u003c\/li\u003e\n\u003cli\u003eSensors may read shackles or hooks protruding from the fairlead.\u003c\/li\u003e\n\u003cli\u003eAll sensor testing is done on lifted trucks\u003c\/li\u003e\n\u003cli\u003e*Will not work with Sonar System\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\u003ch3\u003eFab Fours Premium\u003c\/h3\u003e\n\u003cp\u003eThe Fab Fours Premium Series includes fully featured steel bumpers designed for demanding off-road use. These bumpers combine reinforced construction with integrated grille guards, winch compatibility, and accessory mounting points. Designed for demanding off-road use as well as work-ready trucks, the Premium line focuses on strength, protection, and high-end aftermarket styling.\u003c\/p\u003e","brand":"Fab Fours","offers":[{"title":"Default Title","offer_id":20015284158523,"sku":"CS15-F3551-1","price":3499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/fab-fours-cs15-f3551-1-chevy-tahoesuburban-2015-2018-premium-front-bumper-sensor-winch-ready-with-no-guard.jpg?v=1629829874"},{"product_id":"fab-fours-cs15-f3552-1-chevy-tahoe-suburban-2015-2018-premium-front-bumper-sensor-winch-ready-with-pre-runner-guard","title":"Fab Fours CS15-F3552-1 Chevy Suburban 2015-2020 Premium Front Bumper Sensor Winch Ready Pre-Runner Guard","description":"\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Fab Fours Front Bumper Premium\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2015-2020 Chevy Suburban\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e: Blind Spot Monitoring and Lane Departure system will not work. Will not work with Sonar System\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e: 325 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (L x W x H)\u003c\/strong\u003e: 90 x 42 x 37 in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteel Material\u003c\/strong\u003e: 3\/16″ US Steel\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e: Fab Fours 2 Stage Black Powder Coat\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eFab Fours Premium CS15-F3552-1\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides far more tire clearance\u003c\/li\u003e\n\u003cli\u003eWinch Ready – Accepts up to 12,000 lb. winches or smaller\u003c\/li\u003e\n\u003cli\u003e1″ D-Ring mounts\u003c\/li\u003e\n\u003cli\u003e2-piece mounting system with adjustability to allow a “custom” fit\u003c\/li\u003e\n\u003cli\u003eFab Fours signature injection molded light housings\u003c\/li\u003e\n\u003cli\u003eFab Fours’ 90mm fog and 60mm turn indicator lights are included FREE with the bumper\u003c\/li\u003e\n\u003cli\u003eSensors may read shackles or hooks protruding from the fairlead.\u003c\/li\u003e\n\u003cli\u003eAll sensor testing is done on lifted trucks\u003c\/li\u003e\n\u003cli\u003e*Will not work with Sonar System\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\u003ch3\u003eFab Fours Premium\u003c\/h3\u003e\n\u003cp\u003eThe Fab Fours Premium Series includes fully featured steel bumpers designed for demanding off-road use. These bumpers combine reinforced construction with integrated grille guards, winch compatibility, and accessory mounting points. Designed for demanding off-road use as well as work-ready trucks, the Premium line focuses on strength, protection, and high-end aftermarket styling.\u003c\/p\u003e","brand":"Fab Fours","offers":[{"title":"Default Title","offer_id":20015284191291,"sku":"CS15-F3552-1","price":3729.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/fab-fours-cs15-f3552-1-chevy-tahoesuburban-2015-2018-premium-front-bumper-sensor-winch-ready-with-pre-runner-guard.jpg?v=1629829877"},{"product_id":"frontier-300-29-9005-chevy-suburban-1999-2002-front-bumper","title":"Frontier 300-29-9005 Original Chevy Suburban 2000-2006 Front Bumper","description":"\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Frontier Original Front Bumper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2000-2006 Chevy Suburban\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e: Accommodates Factory Tow Hooks and Fog Lights.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e: 185 lbs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (L x W x H)\u003c\/strong\u003e: 84 x 36 x 36 in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Black Powder Coated\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"Brand\"\u003eFrontier Original 300-29-9005\u003c\/h2\u003e\n\u003ch3 class=\"Sub\"\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"Point\"\u003e\n\u003cli\u003eAccommodates Factory Tow Hooks and Fog Lights\u003c\/li\u003e\n\u003cli\u003eNo Drill Installation\u003c\/li\u003e\n\u003cli\u003eBlack Powder Coated\u003c\/li\u003e\n\u003cli\u003eImage may not reflect actual part number selected\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLights and all accessories are sold separately\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Frontier","offers":[{"title":"Default Title","offer_id":20212412284987,"sku":"300-29-9005","price":1847.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/frontier-300-29-9005-chevy-suburban-1999-2002-front-bumper.jpg?v=1629830259"},{"product_id":"fab-fours-cs15-w3551-1-chevy-tahoe-and-suburban-2015-2018-premium-rear-bumper-with-sensor","title":"Fab Fours CS15-W3551-1 Chevy Suburban 2015-2020 Premium Rear Bumper","description":"\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Fab Fours Rear Bumper Premium\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2015-2020 Chevy Suburban\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e: Not Compatible with (BSM) Blind Spot Monitoring\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e: 200 lbs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (L x W x H)\u003c\/strong\u003e: 89 x 30 x 12 in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteel Material\u003c\/strong\u003e: 3\/16″ US Steel\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e: Fab Fours 2 Stage Black Powder Coat\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"Brand\"\u003eFab Fours Premium CS15-W3551-1\u003c\/h2\u003e\n\u003ch3 class=\"Sub\"\u003eFeatures:\u003c\/h3\u003e\n\u003cdiv class=\"col-md-8\"\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated Steps on either side of the Tailgate\u003c\/li\u003e\n\u003cli\u003eDurable formed Steel Construction\u003c\/li\u003e\n\u003cli\u003eRetain OEM Receiver Hitch and Wiring Locations\u003c\/li\u003e\n\u003cli\u003e3\/4″ D-Ring Recovery Points\u003c\/li\u003e\n\u003cli\u003eSensor sensitivity, OE sensor housing, orientation, and operating conditions are all variables that will influence functionality of the sensors.\u003c\/li\u003e\n\u003cli\u003eAll sensor testing is done on lifted trucks.\u003c\/li\u003e\n\u003cli\u003eNot Compatible with (BSM) Blind Spot Monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cul class=\"Point\"\u003e\u003c\/ul\u003e\u003ch3\u003eFab Fours Premium\u003c\/h3\u003e\n\u003cp\u003eThe Fab Fours Premium Series includes fully featured steel bumpers designed for demanding off-road use. These bumpers combine reinforced construction with integrated grille guards, winch compatibility, and accessory mounting points. Designed for demanding off-road use as well as work-ready trucks, the Premium line focuses on strength, protection, and high-end aftermarket styling.\u003c\/p\u003e","brand":"Fab Fours","offers":[{"title":"Default Title","offer_id":20398856175675,"sku":"CS15-W3551-1","price":2689.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/CS15-W3551-1-1_1200x_f9beab0a-3a7f-41c8-8a6d-c8cc259780df.jpg?v=1629830427"},{"product_id":"steelcraft-hd-front-grille-guard-chevy-suburban-tahoe-2007-2014-50-0290","title":"Steelcraft 50-0290 2007-2014 Chevy Suburban\/Tahoe HD Front Grille Guard","description":"\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Steelcraft HD Grille Guard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2007-2014 Chevy Suburban\/Tahoe\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e: E-coated and powder coated\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e 1500 only\u003c\/p\u003e\n\u003c!-- split --\u003e \u003ch2\u003eSteelcraft 50-0290 Grille Guard\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne piece fully welded design\u003c\/li\u003e\n\u003cli\u003ePunch plate grille\u003c\/li\u003e\n\u003cli\u003eWrap around protection\u003c\/li\u003e\n\u003cli\u003eKeep your OE tow hooks\u003c\/li\u003e\n\u003cli\u003eE-coated and Powder Coated to ensure quality performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHD Replacement Series\u003c\/h3\u003e\n\u003cp\u003eThe Steelcraft HD Replacement Series is designed as a full replacement front bumper built for maximum strength and dependable protection. This line focuses on heavy-duty steel construction, reinforced mounting points, and a clean, factory-style fit that integrates closely with the truck’s frame. HD Replacement Series bumpers are built for drivers who use their trucks for work, towing, or demanding environments and want added front-end protection without sacrificing fitment accuracy or functionality.\u003c\/p\u003e","brand":"Steelcraft","offers":[{"title":"Default Title","offer_id":31359143084150,"sku":"50-0290","price":879.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/steelcraft-hd-front-grille-guard-chevy-suburbantahoe-2007-2014-50-0290-261539.jpg?v=1681180922"},{"product_id":"steelcraft-hd-front-grille-guard-chevy-suburban-tahoe-2015-2019-50-0400","title":"Steelcraft 50-0400 2015-2020 Chevy Suburban HD Front Grille Guard","description":"\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Steelcraft HD Grille Guard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2015-2020 Chevy Suburban 1500\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e Excludes adaptive cruise control. Does not fit the 2021 new body. Parking sensors will detect guard. Parking sensor relocation kit #10420SRP available for purchase. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e: E-coated and powder coated\u003c\/p\u003e\n\u003c!-- split --\u003e \u003ch2\u003eSteelcraft 50-0400 Grille Guard\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne piece fully welded design\u003c\/li\u003e\n\u003cli\u003ePunch plate grille\u003c\/li\u003e\n\u003cli\u003eWrap around protection\u003c\/li\u003e\n\u003cli\u003eSemi-gloss black\u003c\/li\u003e\n\u003cli\u003eE-coated and Powder Coated to ensure quality performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHD Replacement Series\u003c\/h3\u003e\n\u003cp\u003eThe Steelcraft HD Replacement Series is designed as a full replacement front bumper built for maximum strength and dependable protection. This line focuses on heavy-duty steel construction, reinforced mounting points, and a clean, factory-style fit that integrates closely with the truck’s frame. HD Replacement Series bumpers are built for drivers who use their trucks for work, towing, or demanding environments and want added front-end protection without sacrificing fitment accuracy or functionality.\u003c\/p\u003e","brand":"Steelcraft","offers":[{"title":"Default Title","offer_id":31359143215222,"sku":"50-0400","price":879.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/steelcraft-hd-front-grille-guard-chevy-suburban-2015-2020-50-0400.jpg?v=1629831342"},{"product_id":"steelcraft-hd-front-grille-guard-chevy-tahoe-2015-2020-50-0400","title":"Steelcraft 50-0400 2015-2020 Chevy Tahoe HD Front Grille Guard","description":"\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Steelcraft HD Grille Guard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2015-2020 Chevy Tahoe\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e Excludes adaptive cruise control. Does not fit the 2021 new body\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e: E-coated and powder coated\u003c\/p\u003e\n\u003c!-- split --\u003e \u003ch2\u003eSteelcraft 50-0400 Grille Guard\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne piece fully welded design\u003c\/li\u003e\n\u003cli\u003ePunch plate grille\u003c\/li\u003e\n\u003cli\u003eWrap around protection\u003c\/li\u003e\n\u003cli\u003eSemi-gloss black\u003c\/li\u003e\n\u003cli\u003eE-coated and Powder Coated to ensure quality performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHD Replacement Series\u003c\/h3\u003e\n\u003cp\u003eThe Steelcraft HD Replacement Series is designed as a full replacement front bumper built for maximum strength and dependable protection. This line focuses on heavy-duty steel construction, reinforced mounting points, and a clean, factory-style fit that integrates closely with the truck’s frame. HD Replacement Series bumpers are built for drivers who use their trucks for work, towing, or demanding environments and want added front-end protection without sacrificing fitment accuracy or functionality.\u003c\/p\u003e","brand":"Steelcraft","offers":[{"title":"Default Title","offer_id":32204756385910,"sku":"50-0400","price":879.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/steelcraft-hd-front-grille-guard-chevy-tahoe-2015-2020-50-0400.jpg?v=1612455502"},{"product_id":"ranch-hand-ggc21sbl1c-2021-chevy-tahoe-legend-grille-guard","title":"Ranch Hand GGC21SBL1C 2021-2024 Chevy Tahoe Legend Grille Guard","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Ranch Hand Legend Grille Guard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2021-2024 Chevy Tahoe\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e: Must use PSC19HBL1 for sensor accommodation. Accommodates adaptive cruise control but will have to be relocated\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e: 108 lbs \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGross Weight\u003c\/strong\u003e: 164 lbs \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimension L x W x H\u003c\/strong\u003e: 88 x 36 x 36\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Factory Tow Hooks\u003c\/strong\u003e: Yes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Factory Fog Lights\u003c\/strong\u003e: Yes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Front Parking Sensors\u003c\/strong\u003e: Yes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAccommodates Camera - Adaptive Cruise Control\u003c\/strong\u003e: Yes\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eRanch Hand Legend GGC21SBL1C\u003c\/h2\u003e\n\u003ch3 class=\"Sub\"\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured for various ½ ton trucks\u003c\/li\u003e\n\u003cli\u003eConstructed from 12-gauge steel tubing; solid material amplifying strength and sturdiness\u003c\/li\u003e\n\u003cli\u003e5\/16” upright thickness add to toughness and durability\u003c\/li\u003e\n\u003cli\u003eOne-piece welded designs with no expanded metal prevents rattling of multiple pieces\u003c\/li\u003e\n\u003cli\u003eFrame-mounted in four locations to eliminate vibration and ensure the most secure fit\u003c\/li\u003e\n\u003cli\u003eCustom punched grille inserts to match truck manufacturer’s grille pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"Point\"\u003e\u003c\/ul\u003e\u003ch3\u003eLegend Series\u003c\/h3\u003e\n\u003cp\u003eThe Ranch Hand Legend Series is built as a full replacement front bumper designed for maximum protection and long-term durability. This line focuses on heavy-duty steel construction, reinforced structure, and a work-ready design that mounts securely to the truck’s frame using heavy-duty brackets. Legend Series bumpers are intended for drivers who rely on their trucks for towing, jobsite use, and demanding conditions, prioritizing strength and coverage over styling extras.\u003c\/p\u003e","brand":"Ranch Hand","offers":[{"title":"Default Title","offer_id":32208173564022,"sku":"GGC21SBL1C","price":976.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/ranch-hand-ggc21sbl1c-2021-chevy-tahoe-legend-grille-guard.jpg?v=1618497962"},{"product_id":"ranch-hand-ggc21sbl1c-2021-chevy-suburban-legend-grille-guard","title":"Ranch Hand GGC21SBL1C 2021-2024 Chevy Suburban Legend Grille Guard","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Ranch Hand Legend Grille Guard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2021-2024 Chevy Suburban\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e: Must use PSC19HBL1 for sensor accommodation. Accommodates adaptive cruise control but will have to be relocated\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e: 108 lbs \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGross Weight\u003c\/strong\u003e: 164 lbs \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimension L x W x H\u003c\/strong\u003e: 88 x 36 x 36\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Factory Tow Hooks\u003c\/strong\u003e: Yes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Factory Fog Lights\u003c\/strong\u003e: Yes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Front Parking Sensors\u003c\/strong\u003e: Yes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAccommodates Camera - Adaptive Cruise Control\u003c\/strong\u003e: Yes\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eRanch Hand Legend GGC21SBL1C\u003c\/h2\u003e\n\u003ch3 class=\"Sub\"\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured for various ½ ton trucks\u003c\/li\u003e\n\u003cli\u003eConstructed from 12-gauge steel tubing; solid material amplifying strength and sturdiness\u003c\/li\u003e\n\u003cli\u003e5\/16” upright thickness add to toughness and durability\u003c\/li\u003e\n\u003cli\u003eOne-piece welded designs with no expanded metal prevents rattling of multiple pieces\u003c\/li\u003e\n\u003cli\u003eFrame-mounted in four locations to eliminate vibration and ensure the most secure fit\u003c\/li\u003e\n\u003cli\u003eCustom punched grille inserts to match truck manufacturer’s grille pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"Point\"\u003e\u003c\/ul\u003e\u003ch3\u003eLegend Series\u003c\/h3\u003e\n\u003cp\u003eThe Ranch Hand Legend Series is built as a full replacement front bumper designed for maximum protection and long-term durability. This line focuses on heavy-duty steel construction, reinforced structure, and a work-ready design that mounts securely to the truck’s frame using heavy-duty brackets. Legend Series bumpers are intended for drivers who rely on their trucks for towing, jobsite use, and demanding conditions, prioritizing strength and coverage over styling extras.\u003c\/p\u003e","brand":"Ranch Hand","offers":[{"title":"Default Title","offer_id":32208175693942,"sku":"GGC21SBL1C","price":976.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/ranch-hand-ggc21sbl1c-2021-chevy-suburban-legend-grille-guard.jpg?v=1618498023"},{"product_id":"ranch-hand-ggc15hbl1-2015-2020-chevy-suburban-legend-grille-guard","title":"Ranch Hand GGC15HBL1 2015-2020 Chevy Suburban Legend Grille Guard","description":"\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Ranch Hand Legend Grille Guard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2015-2020 Chevy Suburban\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e: Does not accommodate adaptive cruise. Does not fit Z71\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e: 108 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGross Weight\u003c\/strong\u003e: 136 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimension L x W x H\u003c\/strong\u003e: 85 x 36 x 31\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Factory Tow Hooks\u003c\/strong\u003e: Yes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Factory Fog Lights\u003c\/strong\u003e: Yes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Front Parking Sensors\u003c\/strong\u003e: No\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAccommodates Camera - Adaptive Cruise Control\u003c\/strong\u003e: No\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"Brand\"\u003eRanch Hand Legend GGC15HBL1 \u003c\/h2\u003e\n\u003ch3 class=\"Sub\"\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\nManufactured for various ½ ton SUVs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConstructed from 12-gauge steel tubing; solid material amplifying strength and sturdiness\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e5\/16” upright thickness add to toughness and durability\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOne-piece welded designs with no expanded metal prevents rattling of multiple pieces\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFrame-mounted in four locations to eliminate vibration and ensure the most secure fit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCustom punched grille inserts to match truck manufacturer’s grille pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"Point\"\u003e\u003c\/ul\u003e\u003ch3\u003eLegend Series\u003c\/h3\u003e\n\u003cp\u003eThe Ranch Hand Legend Series is built as a full replacement front bumper designed for maximum protection and long-term durability. This line focuses on heavy-duty steel construction, reinforced structure, and a work-ready design that mounts securely to the truck’s frame using heavy-duty brackets. Legend Series bumpers are intended for drivers who rely on their trucks for towing, jobsite use, and demanding conditions, prioritizing strength and coverage over styling extras.\u003c\/p\u003e","brand":"Ranch Hand","offers":[{"title":"Default Title","offer_id":39305821585526,"sku":"GGC15HBL1","price":976.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/ggc15hbl1_3-rep.jpg?v=1619632303"},{"product_id":"ranch-hand-ggc15hbl1-2015-2020-chevy-tahoe-legend-grille-guard","title":"Ranch Hand GGC15HBL1 2015-2020 Chevy Tahoe Legend Grille Guard","description":"\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Ranch Hand Legend Grille Guard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2015-2020 Chevy Tahoe\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e: Does not accommodate adaptive cruise. Does not fit Z71\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e: 108 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGross Weight\u003c\/strong\u003e: 136 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimension L x W x H\u003c\/strong\u003e: 85 x 36 x 31\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Factory Tow Hooks\u003c\/strong\u003e: Yes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Factory Fog Lights\u003c\/strong\u003e: Yes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Front Parking Sensors\u003c\/strong\u003e: No\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAccommodates Camera - Adaptive Cruise Control\u003c\/strong\u003e: No\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"Brand\"\u003eRanch Hand Legend GGC15HBL1 \u003c\/h2\u003e\n\u003ch3 class=\"Sub\"\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\nManufactured for various ½ ton SUVs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConstructed from 12-gauge steel tubing; solid material amplifying strength and sturdiness\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e5\/16” upright thickness add to toughness and durability\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOne-piece welded designs with no expanded metal prevents rattling of multiple pieces\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFrame-mounted in four locations to eliminate vibration and ensure the most secure fit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCustom punched grille inserts to match truck manufacturer’s grille pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"Point\"\u003e\u003c\/ul\u003e\u003ch3\u003eLegend Series\u003c\/h3\u003e\n\u003cp\u003eThe Ranch Hand Legend Series is built as a full replacement front bumper designed for maximum protection and long-term durability. This line focuses on heavy-duty steel construction, reinforced structure, and a work-ready design that mounts securely to the truck’s frame using heavy-duty brackets. Legend Series bumpers are intended for drivers who rely on their trucks for towing, jobsite use, and demanding conditions, prioritizing strength and coverage over styling extras.\u003c\/p\u003e","brand":"Ranch Hand","offers":[{"title":"Default Title","offer_id":39305829580918,"sku":"GGC15HBL1","price":976.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/ggc15hbl1_3-rep_f8ca9641-9c4a-40fe-9844-cad4dddf5e41.jpg?v=1619632313"},{"product_id":"ranch-hand-ggc07hbl1-2007-2014-chevy-tahoe-legend-grille-guard","title":"Ranch Hand GGC07HBL1 2007-2014 Chevy Tahoe Legend Grille Guard","description":"\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Ranch Hand Legend Grille Guard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2007-2014 Chevy Tahoe\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e: One-piece welded designs with no expanded metal prevents rattling of multiple pieces\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e: 99 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGross Weight\u003c\/strong\u003e: 127 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimension L x W x H\u003c\/strong\u003e: 85 x 36 x 31\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Factory Tow Hooks\u003c\/strong\u003e: Yes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Factory Fog Lights\u003c\/strong\u003e: Yes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Front Parking Sensors\u003c\/strong\u003e: No\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAccommodates Camera - Adaptive Cruise Control\u003c\/strong\u003e: No\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"Brand\"\u003eRanch Hand Legend GGC07HBL1 \u003c\/h2\u003e\n\u003ch3 class=\"Sub\"\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\nManufactured for various ½ ton SUVs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConstructed from 12-gauge steel tubing; solid material amplifying strength and sturdiness\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e5\/16” upright thickness add to toughness and durability\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOne-piece welded designs with no expanded metal prevents rattling of multiple pieces\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFrame-mounted in four locations to eliminate vibration and ensure the most secure fit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCustom punched grille inserts to match truck manufacturer’s grille pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"Point\"\u003e\u003c\/ul\u003e\u003ch3\u003eLegend Series\u003c\/h3\u003e\n\u003cp\u003eThe Ranch Hand Legend Series is built as a full replacement front bumper designed for maximum protection and long-term durability. This line focuses on heavy-duty steel construction, reinforced structure, and a work-ready design that mounts securely to the truck’s frame using heavy-duty brackets. Legend Series bumpers are intended for drivers who rely on their trucks for towing, jobsite use, and demanding conditions, prioritizing strength and coverage over styling extras.\u003c\/p\u003e","brand":"Ranch Hand","offers":[{"title":"Default Title","offer_id":39306829267062,"sku":"GGC07HBL1","price":976.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/ggc07hbl1-rep.jpg?v=1619705780"},{"product_id":"ranch-hand-ggc07hbl1-2007-2014-chevy-suburban-legend-grille-guard","title":"Ranch Hand GGC07HBL1 2007-2014 Chevy Suburban Legend Grille Guard","description":"\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Ranch Hand Legend Grille Guard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2007-2014 Chevy Suburban\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e: One-piece welded designs with no expanded metal prevents rattling of multiple pieces\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e: 99 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGross Weight\u003c\/strong\u003e: 127 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimension L x W x H\u003c\/strong\u003e: 85 x 36 x 31\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Factory Tow Hooks\u003c\/strong\u003e: Yes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Factory Fog Lights\u003c\/strong\u003e: Yes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Front Parking Sensors\u003c\/strong\u003e: No\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAccommodates Camera - Adaptive Cruise Control\u003c\/strong\u003e: No\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"Brand\"\u003eRanch Hand Legend GGC07HBL1 \u003c\/h2\u003e\n\u003ch3 class=\"Sub\"\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\nManufactured for various ½ ton SUVs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConstructed from 12-gauge steel tubing; solid material amplifying strength and sturdiness\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e5\/16” upright thickness add to toughness and durability\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOne-piece welded designs with no expanded metal prevents rattling of multiple pieces\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFrame-mounted in four locations to eliminate vibration and ensure the most secure fit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCustom punched grille inserts to match truck manufacturer’s grille pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"Point\"\u003e\u003c\/ul\u003e\u003ch3\u003eLegend Series\u003c\/h3\u003e\n\u003cp\u003eThe Ranch Hand Legend Series is built as a full replacement front bumper designed for maximum protection and long-term durability. This line focuses on heavy-duty steel construction, reinforced structure, and a work-ready design that mounts securely to the truck’s frame using heavy-duty brackets. Legend Series bumpers are intended for drivers who rely on their trucks for towing, jobsite use, and demanding conditions, prioritizing strength and coverage over styling extras.\u003c\/p\u003e","brand":"Ranch Hand","offers":[{"title":"Default Title","offer_id":39306840408182,"sku":"GGC07HBL1","price":976.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/ggc07hbl1-rep_460cc32a-0a90-4ca9-b1ef-a1b325151bf0.jpg?v=1619706018"},{"product_id":"ranch-hand-ggc99hbl1-2000-2006-chevy-suburban-legend-grille-guard","title":"Ranch Hand GGC99HBL1 2000-2006 Chevy Suburban Legend Grille Guard","description":"\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Ranch Hand Legend Grille Guard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2000-2006 Chevy Suburban\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e: One-piece welded designs with no expanded metal prevents rattling of multiple pieces\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e: 121 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGross Weight\u003c\/strong\u003e: 149 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimension L x W x H\u003c\/strong\u003e: 85 x 36 x 31\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Factory Tow Hooks\u003c\/strong\u003e: Yes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Factory Fog Lights\u003c\/strong\u003e: Yes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Front Parking Sensors\u003c\/strong\u003e: No\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAccommodates Camera - Adaptive Cruise Control\u003c\/strong\u003e: No\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"Brand\"\u003eRanch Hand Legend GGC99HBL1 \u003c\/h2\u003e\n\u003ch3 class=\"Sub\"\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\nManufactured for various ½ ton SUVs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConstructed from 12-gauge steel tubing; solid material amplifying strength and sturdiness\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e5\/16” upright thickness add to toughness and durability\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOne-piece welded designs with no expanded metal prevents rattling of multiple pieces\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFrame-mounted in four locations to eliminate vibration and ensure the most secure fit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCustom punched grille inserts to match truck manufacturer’s grille pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"Point\"\u003e\u003c\/ul\u003e\u003ch3\u003eLegend Series\u003c\/h3\u003e\n\u003cp\u003eThe Ranch Hand Legend Series is built as a full replacement front bumper designed for maximum protection and long-term durability. This line focuses on heavy-duty steel construction, reinforced structure, and a work-ready design that mounts securely to the truck’s frame using heavy-duty brackets. Legend Series bumpers are intended for drivers who rely on their trucks for towing, jobsite use, and demanding conditions, prioritizing strength and coverage over styling extras.\u003c\/p\u003e","brand":"Ranch Hand","offers":[{"title":"Default Title","offer_id":39306877436022,"sku":"GGC99HBL1","price":976.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/GGC99HBL1.jpg?v=1619709370"},{"product_id":"ranch-hand-ggc99hbl1-2000-2006-chevy-tahoe-legend-grille-guard","title":"Ranch Hand GGC99HBL1 2000-2006 Chevy Tahoe Legend Grille Guard","description":"\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Ranch Hand Legend Grille Guard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2000-2006 Chevy Tahoe\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e: One-piece welded designs with no expanded metal prevents rattling of multiple pieces\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e: 121 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGross Weight\u003c\/strong\u003e: 149 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimension L x W x H\u003c\/strong\u003e: 85 x 36 x 31\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Factory Tow Hooks\u003c\/strong\u003e: Yes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Factory Fog Lights\u003c\/strong\u003e: Yes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Front Parking Sensors\u003c\/strong\u003e: No\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAccommodates Camera - Adaptive Cruise Control\u003c\/strong\u003e: No\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"Brand\"\u003eRanch Hand Legend GGC99HBL1 \u003c\/h2\u003e\n\u003ch3 class=\"Sub\"\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\nManufactured for various ½ ton SUVs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConstructed from 12-gauge steel tubing; solid material amplifying strength and sturdiness\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e5\/16” upright thickness add to toughness and durability\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOne-piece welded designs with no expanded metal prevents rattling of multiple pieces\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFrame-mounted in four locations to eliminate vibration and ensure the most secure fit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCustom punched grille inserts to match truck manufacturer’s grille pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"Point\"\u003e\u003c\/ul\u003e\u003ch3\u003eLegend Series\u003c\/h3\u003e\n\u003cp\u003eThe Ranch Hand Legend Series is built as a full replacement front bumper designed for maximum protection and long-term durability. This line focuses on heavy-duty steel construction, reinforced structure, and a work-ready design that mounts securely to the truck’s frame using heavy-duty brackets. Legend Series bumpers are intended for drivers who rely on their trucks for towing, jobsite use, and demanding conditions, prioritizing strength and coverage over styling extras.\u003c\/p\u003e","brand":"Ranch Hand","offers":[{"title":"Default Title","offer_id":39306880483446,"sku":"GGC99HBL1","price":976.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/GGC99HBL1_feed4b4e-7795-4af9-bac3-b6a6fb51db84.jpg?v=1619709442"},{"product_id":"ranch-hand-ggc881bl1-1992-1999-chevy-suburban-legend-grille-guard","title":"Ranch Hand GGC881BL1 1992-1999 Chevy Suburban\/Yukon\/Jimmy Legend Grille Guard","description":"\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Ranch Hand Legend Grille Guard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 1992-1999 Chevy Suburban\/Yukon\/Jimmy\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e: One-piece welded designs with no expanded metal prevents rattling of multiple pieces\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e: 103 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGross Weight\u003c\/strong\u003e: 131 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimension L x W x H\u003c\/strong\u003e: 85 x 36 x 31\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Factory Tow Hooks\u003c\/strong\u003e: Yes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Factory Fog Lights\u003c\/strong\u003e: Yes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Front Parking Sensors\u003c\/strong\u003e: No\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAccommodates Camera - Adaptive Cruise Control\u003c\/strong\u003e: No\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"Brand\"\u003eRanch Hand Legend GGC881BL1 \u003c\/h2\u003e\n\u003ch3 class=\"Sub\"\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured for various ½ ton trucks\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConstructed from 12-gauge steel tubing; solid material amplifying strength and sturdiness\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e5\/16” upright thickness add to toughness and durability\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOne-piece welded designs with no expanded metal prevents rattling of multiple pieces\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFrame-mounted in four locations to eliminate vibration and ensure the most secure fit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCustom punched grille inserts to match truck manufacturer’s grille pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"Point\"\u003e\u003c\/ul\u003e\u003ch3\u003eLegend Series\u003c\/h3\u003e\n\u003cp\u003eThe Ranch Hand Legend Series is built as a full replacement front bumper designed for maximum protection and long-term durability. This line focuses on heavy-duty steel construction, reinforced structure, and a work-ready design that mounts securely to the truck’s frame using heavy-duty brackets. Legend Series bumpers are intended for drivers who rely on their trucks for towing, jobsite use, and demanding conditions, prioritizing strength and coverage over styling extras.\u003c\/p\u003e","brand":"Ranch Hand","offers":[{"title":"Default Title","offer_id":39306891526262,"sku":"GGC881BL1","price":976.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/ggc881bl1.jpg?v=1628775382"},{"product_id":"frontier-200-22-1003-2021-chevy-tahoe-suburban-grille-guard","title":"Frontier 200-22-1003 2021-2024 Chevy Tahoe\/Suburban Grille Guard","description":"\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Frontier Grille Guard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2021-2024 Chevy Tahoe\/Suburban\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e: Sensors + Camera Compatible. The image may not reflect the actual part number selected. Does Not Fit Diesel Models\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e: 110 lbs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (H x W x D)\u003c\/strong\u003e: 36 x 84 x 36 in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e: Powdercoat Steel\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"Sub\"\u003eFrontier 200-22-1003 Grille Guard\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"partDetail_ProductFeaturesUL\" id=\"partDetail_ProductFeaturesUL\"\u003e\n\u003cli\u003e\n\u003cdiv class=\"partDetail_Description\" id=\"partDetail_Description\"\u003eAccommodates Factory Tow Hooks\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"partDetail_Description\" id=\"partDetail_Description\"\u003eNo Drill Installation\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"partDetail_Description\" id=\"partDetail_Description\"\u003eBlack Powder Coated\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"partDetail_Description\" id=\"partDetail_Description\"\u003eAccommodates Factory Part Assist Sensors\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"partDetail_Description\" id=\"partDetail_Description\"\u003eAdaptive Cruise Will NOT Work with Diesel Models\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"partDetail_Description\" id=\"partDetail_Description\"\u003eSuper Cruise Will NOT Work\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFrontier Truck Gear is the premier manufacturer of some of the most durable and long-lasting Grille Guards on the market today. When you put a Frontier Grille Guard on your truck you can be confident that your vehicle, and more importantly, your family are well protected. This is the best brush guard on the market! It features an original heavy-duty one-piece design for only the best in efficiency and strength. \u003c\/p\u003e\n\u003cp\u003eThe trademark punch-plate grille and full wrap-around style have been designed to match the lines of your vehicle. Each custom-made Frontier Truck Gear product is constructed using the best technology and highest quality materials. Our dedication to innovation ensures the sleekest aero-dynamic styling. For added protection and security, we frame to mount all our grille guards. Get your Frontier Truck Gear Grille Guard today.\u003c\/p\u003e\n\u003cul class=\"Point\"\u003e\u003c\/ul\u003e","brand":"Frontier","offers":[{"title":"Default Title","offer_id":39677026304118,"sku":"200-22-1003","price":974.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/Frontier200-22-10032021ChevyTahoeSuburbanGrilleGuard.png?v=1681309070"},{"product_id":"frontier-200-22-1004-2021-chevy-tahoe-suburban-grille-guard","title":"Frontier 200-22-1004 2021-2024 Chevy Tahoe\/Suburban Grille Guard","description":"\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Frontier Grille Guard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2021-2024 Chevy Tahoe\/Suburban\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e: Sensors. Does Not Fit Z71 Or Diesel Models\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e: 110 lbs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (H x W x D)\u003c\/strong\u003e: 36 x 84 x 36 in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e: Powdercoat Steel\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"Sub\"\u003eFrontier 200-22-1004 Grille Guard\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"partDetail_ProductFeaturesUL\" id=\"partDetail_ProductFeaturesUL\"\u003e\n\u003cli\u003e\n\u003cdiv class=\"partDetail_Description\" id=\"partDetail_Description\"\u003eDrilling of Factory Bumper Required\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"partDetail_Description\" id=\"partDetail_Description\"\u003eBlack Powder Coated\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"partDetail_Description\" id=\"partDetail_Description\"\u003eAccommodates Factory Sensors \/ Does Not Accommodate Camera\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"partDetail_Description\" id=\"partDetail_Description\"\u003eAdaptive Cruise Will NOT Work With Diesel Models\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"partDetail_Description\" id=\"partDetail_Description\"\u003eSuper Cruise Will NOT Work\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"Point\"\u003e\u003c\/ul\u003e","brand":"Frontier","offers":[{"title":"Default Title","offer_id":39677029810294,"sku":"200-22-1004","price":974.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/files\/BumperStock_3aa525cf-37b0-4f2d-9962-85013a93fb8a.jpg?v=1741284195"},{"product_id":"frontier-200-21-5003-2015-2020-chevy-tahoe-suburban-grille-guard","title":"Frontier 200-21-5003 2015-2020 Chevy Tahoe\/Suburban Grille Guard","description":"\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Frontier Grille Guard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2015-2020 Chevy Tahoe\/Suburban\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e: Sensors + No Adaptive Cruise Control. The image may not reflect the actual part number selected. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e: 108 lbs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (H x W x D)\u003c\/strong\u003e: 36 x 84 x 36 in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e: Powdercoat Steel\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"Sub\"\u003eFrontier 200-21-5003 Grille Guard\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"partDetail_ProductFeaturesUL\" id=\"partDetail_ProductFeaturesUL\"\u003e\n\u003cli\u003eNo Drill Installation\u003c\/li\u003e\n\u003cli\u003eBlack Powder Coated\u003c\/li\u003e\n\u003cli\u003eAccommodates Factory Park Assist Sensors\u003c\/li\u003e\n\u003cli\u003eWill Not Accommodate Factory Adaptive Cruise\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFrontier Truck Gear is the premier manufacturer of some of the most durable and long-lasting Grille Guards on the market today. When you put a Frontier Grille Guard on your truck you can be confident that your vehicle, and more importantly, your family are well protected. This is the best brush guard on the market! It features an original heavy-duty one-piece design for only the best in efficiency and strength. \u003c\/p\u003e\n\u003cp\u003eThe trademark punch-plate grille and full wrap-around style have been designed to match the lines of your vehicle. Each custom-made Frontier Truck Gear product is constructed using the best technology and highest quality materials. Our dedication to innovation ensures the sleekest aero-dynamic styling. For added protection and security, we frame to mount all our grille guards. Get your Frontier Truck Gear Grille Guard today.\u003c\/p\u003e\n\u003cul class=\"Point\"\u003e\u003c\/ul\u003e","brand":"Frontier","offers":[{"title":"Default Title","offer_id":39679375409270,"sku":"200-21-5003","price":974.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/Frontier200-21-50032015-2020ChevyTahoeSuburbanGrilleGuard_3.jpg?v=1681315448"},{"product_id":"frontier-200-21-5004-2015-2020-chevy-tahoe-suburban-grille-guard","title":"Frontier 200-21-5004 2015-2020 Chevy Tahoe\/Suburban Grille Guard","description":"\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Frontier Grille Guard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2015-2020 Chevy Tahoe\/Suburban\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e: No Sensors + No Adaptive Cruise Control. Image may differ from actual product\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e: 109 lbs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (H x W x D)\u003c\/strong\u003e: 36 x 84 x 36 in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e: Powdercoat Steel\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"Sub\"\u003eFrontier \u003ca\u003e200-21-5004\u003c\/a\u003e Grille Guard\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"partDetail_ProductFeaturesUL\" id=\"partDetail_ProductFeaturesUL\"\u003e\n\u003cli\u003eImage may differ from actual product\u003c\/li\u003e\n\u003cli\u003eNo Drill Installation\u003c\/li\u003e\n\u003cli\u003eBlack Powder Coated\u003c\/li\u003e\n\u003cli\u003eWill Not Accommodate Factory Part Assist Sensors\u003c\/li\u003e\n\u003cli\u003eWill Not Accommodate Factory Adaptive Cruise\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFrontier Truck Gear is the premier manufacturer of some of the most durable and long-lasting Grille Guards on the market today. When you put a Frontier Grille Guard on your truck you can be confident that your vehicle, and more importantly, your family are well protected. This is the best brush guard on the market! It features an original heavy-duty one-piece design for only the best in efficiency and strength. \u003c\/p\u003e\n\u003cp\u003eThe trademark punch-plate grille and full wrap-around style have been designed to match the lines of your vehicle. Each custom-made Frontier Truck Gear product is constructed using the best technology and highest quality materials. Our dedication to innovation ensures the sleekest aero-dynamic styling. For added protection and security, we frame to mount all our grille guards. Get your Frontier Truck Gear Grille Guard today.\u003c\/p\u003e\n\u003cul class=\"Point\"\u003e\u003c\/ul\u003e","brand":"Frontier","offers":[{"title":"Default Title","offer_id":39679408701558,"sku":"200-21-5004","price":974.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/files\/Frontier200-21-50042015-2020ChevyTahoeSuburbanGrilleGuard_3.jpg?v=1709837916"},{"product_id":"frontier-200-20-7003-2007-2014-chevy-tahoe-suburban-grille-guard","title":"Frontier 200-20-7003 2007-2014 Chevy Tahoe\/Suburban Grille Guard","description":"\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Frontier Grille Guard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2007-2014 Chevy Tahoe\/Suburban\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e: The image may not reflect the actual part number selected. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e: 90 lbs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (H x W x D)\u003c\/strong\u003e: 36 x 84 x 36 in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e: Powdercoat Steel\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"Sub\"\u003eFrontier 200-20-7003 Grille Guard\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"partDetail_ProductFeaturesUL\" id=\"partDetail_ProductFeaturesUL\"\u003e\n\u003cli\u003eNo Drill Installation\u003c\/li\u003e\n\u003cli\u003eBlack Powder Coated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFrontier Truck Gear is the premier manufacturer of some of the most durable and long-lasting Grille Guards on the market today. When you put a Frontier Grille Guard on your truck you can be confident that your vehicle, and more importantly, your family are well protected. This is the best brush guard on the market! It features an original heavy-duty one-piece design for only the best in efficiency and strength. \u003c\/p\u003e\n\u003cp\u003eThe trademark punch-plate grille and full wrap-around style have been designed to match the lines of your vehicle. Each custom-made Frontier Truck Gear product is constructed using the best technology and highest quality materials. Our dedication to innovation ensures the sleekest aero-dynamic styling. For added protection and security, we frame to mount all our grille guards. Get your Frontier Truck Gear Grille Guard today.\u003c\/p\u003e\n\u003cul class=\"Point\"\u003e\u003c\/ul\u003e","brand":"Frontier","offers":[{"title":"Default Title","offer_id":39679433900150,"sku":"200-20-7003","price":974.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/Frontier200-20-70032007-2014ChevyTahoeSuburbanGrilleGuard_4.jpg?v=1681315823"},{"product_id":"frontier-200-20-7004-2007-2013-chevy-suburban-2500-grille-guard","title":"Frontier 200-20-7004 2007-2013 Chevy Suburban 2500 Grille Guard","description":"\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Frontier Grille Guard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2007-2013 Chevy Suburban 2500\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e: The image may not reflect the actual part number selected. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e: 90 lbs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (H x W x D)\u003c\/strong\u003e: 36 x 84 x 36 in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e: Powdercoat Steel\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"Sub\"\u003eFrontier 200-20-7004 Grille Guard\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"partDetail_ProductFeaturesUL\" id=\"partDetail_ProductFeaturesUL\"\u003e\n\u003cli\u003eNo Drill Installation\u003c\/li\u003e\n\u003cli\u003eBlack Powder Coated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFrontier Truck Gear is the premier manufacturer of some of the most durable and long-lasting Grille Guards on the market today. When you put a Frontier Grille Guard on your truck you can be confident that your vehicle, and more importantly, your family are well protected. This is the best brush guard on the market! It features an original heavy-duty one-piece design for only the best in efficiency and strength. \u003c\/p\u003e\n\u003cp\u003eThe trademark punch-plate grille and full wrap-around style have been designed to match the lines of your vehicle. Each custom-made Frontier Truck Gear product is constructed using the best technology and highest quality materials. Our dedication to innovation ensures the sleekest aero-dynamic styling. For added protection and security, we frame to mount all our grille guards. Get your Frontier Truck Gear Grille Guard today.\u003c\/p\u003e\n\u003cul class=\"Point\"\u003e\u003c\/ul\u003e","brand":"Frontier","offers":[{"title":"Default Title","offer_id":39679464013942,"sku":"200-20-7004","price":974.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/Frontier200-20-70042007-2013ChevySuburban2500GrilleGuard_2.jpg?v=1681315765"},{"product_id":"ranch-hand-ggc21sbl1-2021-2022-chevy-suburban-legend-grille-guard","title":"Ranch Hand GGC21SBL1 2021-2024 Chevy Suburban Legend Grille Guard","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Ranch Hand Legend Grille Guard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2021-2024 Chevy Suburban\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e: Must use PSC19HBL1 for sensor accommodation. Accommodates adaptive cruise control but will have to be relocate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e: 107 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGross Weight\u003c\/strong\u003e: 164 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimension L x W x H\u003c\/strong\u003e: 88 x 36 x 36\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Factory Tow Hooks\u003c\/strong\u003e: Yes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Factory Fog Lights\u003c\/strong\u003e: Yes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Front Parking Sensors\u003c\/strong\u003e: Yes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAccommodates Camera - Adaptive Cruise Control\u003c\/strong\u003e: No\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eRanch Hand Legend GGC21SBL1 \u003c\/h2\u003e\n\u003ch3 class=\"Sub\"\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured for various ½ ton trucks.\u003c\/li\u003e\n\u003cli\u003eConstructed from 12-gauge steel tubing; solid material amplifying strength and sturdiness\u003c\/li\u003e\n\u003cli\u003e5\/16” upright thickness add to toughness and durability\u003c\/li\u003e\n\u003cli\u003eOne-piece welded designs with no expanded metal prevents rattling of multiple pieces\u003c\/li\u003e\n\u003cli\u003eFrame-mounted in four locations to eliminate vibration and ensure the most secure fit\u003c\/li\u003e\n\u003cli\u003eCustom punched grille inserts to match truck manufacturer’s grille pattern.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"Point\"\u003e\u003c\/ul\u003e\u003ch3\u003eLegend Series\u003c\/h3\u003e\n\u003cp\u003eThe Ranch Hand Legend Series is built as a full replacement front bumper designed for maximum protection and long-term durability. This line focuses on heavy-duty steel construction, reinforced structure, and a work-ready design that mounts securely to the truck’s frame using heavy-duty brackets. Legend Series bumpers are intended for drivers who rely on their trucks for towing, jobsite use, and demanding conditions, prioritizing strength and coverage over styling extras.\u003c\/p\u003e","brand":"Ranch Hand","offers":[{"title":"Default Title","offer_id":40024197759094,"sku":"GGC21SBL1","price":976.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/RanchHandGGC21SBL12021-2022ChevySuburbanLegendGrilleGuard_2.jpg?v=1681218726"},{"product_id":"ranch-hand-ggc21sbl1-2021-2022-chevy-tahoe-legend-grille-guard","title":"Ranch Hand GGC21SBL1 2021-2024 Chevy Tahoe Legend Grille Guard","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Ranch Hand Legend Grille Guard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2021-2024 Chevy Tahoe\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e: Must use PSC19HBL1 for sensor accommodation. Accommodates adaptive cruise control but will have to be relocate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e: 107 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGross Weight\u003c\/strong\u003e: 164 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimension L x W x H\u003c\/strong\u003e: 88 x 36 x 36\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Factory Tow Hooks\u003c\/strong\u003e: Yes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Factory Fog Lights\u003c\/strong\u003e: Yes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains Front Parking Sensors\u003c\/strong\u003e: Yes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAccommodates Camera - Adaptive Cruise Control\u003c\/strong\u003e: No\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eRanch Hand Legend GGC21SBL1 \u003c\/h2\u003e\n\u003ch3 class=\"Sub\"\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured for various ½ ton trucks.\u003c\/li\u003e\n\u003cli\u003eConstructed from 12-gauge steel tubing; solid material amplifying strength and sturdiness\u003c\/li\u003e\n\u003cli\u003e5\/16” upright thickness add to toughness and durability\u003c\/li\u003e\n\u003cli\u003eOne-piece welded designs with no expanded metal prevents rattling of multiple pieces\u003c\/li\u003e\n\u003cli\u003eFrame-mounted in four locations to eliminate vibration and ensure the most secure fit\u003c\/li\u003e\n\u003cli\u003eCustom punched grille inserts to match truck manufacturer’s grille pattern.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"Point\"\u003e\u003c\/ul\u003e\u003ch3\u003eLegend Series\u003c\/h3\u003e\n\u003cp\u003eThe Ranch Hand Legend Series is built as a full replacement front bumper designed for maximum protection and long-term durability. This line focuses on heavy-duty steel construction, reinforced structure, and a work-ready design that mounts securely to the truck’s frame using heavy-duty brackets. Legend Series bumpers are intended for drivers who rely on their trucks for towing, jobsite use, and demanding conditions, prioritizing strength and coverage over styling extras.\u003c\/p\u003e","brand":"Ranch Hand","offers":[{"title":"Default Title","offer_id":40024200740982,"sku":"GGC21SBL1","price":976.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/RanchHandGGC21SBL12021-2022ChevyTahoeLegendGrilleGuard_2.jpg?v=1681218612"},{"product_id":"hammerhead-600-56-1081-2021-2023-chevy-tahoe-front-non-winch-tvi-bumper","title":"Hammerhead 600-56-1081 2021-2023 Chevy Tahoe Front Non-Winch TVI Bumper","description":"\u003cp\u003e\u003cstrong\u003eStyle:\u003c\/strong\u003e Hammerhead No Brush Guard Low Profile\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit:\u003c\/strong\u003e 2021-2023 Chevy Tahoe\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e Not compatible with sensors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 141 lbs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 90 x 24 x 11 in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteel Material:\u003c\/strong\u003e 7 Gauge\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Textured Black Powder Coat\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eHammerhead 600-56-1081\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade in the USA (Mississippi) with US steel.\u003c\/li\u003e\n\u003cli\u003eOne-piece 7-gauge steel formed and welded front bumper.\u003c\/li\u003e\n\u003cli\u003eEnhanced approach angles proven to perform multiple, repetitive impacts at operating speeds\u003c\/li\u003e\n\u003cli\u003e1\/2″ thick steel mounting hardware for rugged applications \u003c\/li\u003e\n\u003cli\u003eInconspicuous, low-profile design for undercover operations\u003c\/li\u003e\n\u003cli\u003eNot compatible with sensors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription:\u003c\/h3\u003e\n\u003cp\u003eThe TVI bumper is a purpose-built front bumper intended to provide an understated look while serving as a tool for using force or protection vehicle tactics. Crafted from 7-gauge US steel and proven in the field with use during high-risk warrant service and special operations, this front bumper ensures maximum durability for repetitive use. Designed explicitly for production PPV or SSV SUVs, the TVI bumper covers the entire front bumper area while integrating with the vehicle frame through 4-gauge steel mounting hardware.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":40050941919350,"sku":"600-56-1081","price":1548.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/Hammerhead600-56-10812021-2023ChevyTahoeFrontNon-WinchTVIBumper_1.jpg?v=1682088608"},{"product_id":"hammerhead-600-56-1081-2021-2023-chevy-suburban-front-non-winch-tvi-bumper","title":"Hammerhead 600-56-1081 2021-2023 Chevy Suburban Front Non-Winch TVI Bumper","description":"\u003cp\u003e\u003cstrong\u003eStyle:\u003c\/strong\u003e Hammerhead No Brush Guard Low Profile\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit:\u003c\/strong\u003e 2021-2023 Chevy Suburban\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e Not compatible with sensors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 141 lbs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 90 x 24 x 11 in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteel Material:\u003c\/strong\u003e 7 Gauge\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Textured Black Powder Coat\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eHammerhead 600-56-1081\u003c\/h2\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade in the USA (Mississippi) with US steel.\u003c\/li\u003e\n\u003cli\u003eOne-piece 7-gauge steel formed and welded front bumper.\u003c\/li\u003e\n\u003cli\u003eEnhanced approach angles proven to perform multiple, repetitive impacts at operating speeds\u003c\/li\u003e\n\u003cli\u003e1\/2″ thick steel mounting hardware for rugged applications \u003c\/li\u003e\n\u003cli\u003eInconspicuous, low-profile design for undercover operations\u003c\/li\u003e\n\u003cli\u003eNot compatible with sensors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription:\u003c\/h3\u003e\n\u003cp\u003eThe TVI bumper is a purpose-built front bumper intended to provide an understated look while serving as a tool for using force or protection vehicle tactics. Crafted from 7-gauge US steel and proven in the field with use during high-risk warrant service and special operations, this front bumper ensures maximum durability for repetitive use. Designed explicitly for production PPV or SSV SUVs, the TVI bumper covers the entire front bumper area while integrating with the vehicle frame through 4-gauge steel mounting hardware.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":40050945851510,"sku":"600-56-1081","price":1548.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/products\/Hammerhead600-56-10812021-2023ChevySuburbanFrontNon-WinchTVIBumper_1.jpg?v=1682088727"},{"product_id":"westin-57-93805-chevy-tahoe-and-suburban-2015-2017-hdx-winch-mount-grille-black","title":"Westin 57-93805 Chevy Tahoe and Suburban 2015-2020 HDX Winch Mount Grille Black","description":"\u003cp\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e: Westin\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e: 57-93805\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBumper Type\u003c\/strong\u003e: Grille\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Westin Grille Guard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2015-2020 Chevy Tahoe and Suburban\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e: Exclude models with \"Lane Departure Distance Module\"\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"Sub\"\u003eFeatures:\u003c\/h2\u003e\n\u003cul class=\"Point\"\u003e\n\u003cli\u003eMount kit included\u003c\/li\u003e\n\u003cli\u003e1-piece welded uprights\u003c\/li\u003e\n\u003cli\u003e2\"tube full wraparound wings\u003c\/li\u003e\n\u003cli\u003eFull punch plate grille\u003c\/li\u003e\n\u003cli\u003eTray brackets mount directly to the vehicle frame\u003c\/li\u003e\n\u003cli\u003eWinch trays tested to a minimum straight line pull of 16,500 lbs.\u003c\/li\u003e\n\u003cli\u003eFits most medium frame 8,000 - 12,000 lbs. winches (up to 10.25\"tall)\u003c\/li\u003e\n\u003cli\u003eSet of 2 light clamps sold separately\u003c\/li\u003e\n\u003cli\u003eFactory tow hooks cannot be re-used\u003c\/li\u003e\n\u003cli\u003eMinor trimming of tow hook pockets required\u003c\/li\u003e\n\u003cli\u003eWill interfere with front parking sensors if equipped\u003c\/li\u003e\n\u003cli\u003eWill interfere with adaptive cruise control if equipped\u003c\/li\u003e\n\u003cli\u003eTrimming to front bumper plastic required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 class=\"Sub\"\u003eDetails:\u003c\/h2\u003e\n\u003cul class=\"Point\"\u003e\n\u003cli\u003eWeight: 110 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 89\" x 36\" x 30\"\u003c\/li\u003e\n\u003cli\u003eFinish: Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eMaterial: E-Coated Steel\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WESTIN","offers":[{"title":"Default Title","offer_id":40075784126582,"sku":"57-93805","price":1356.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/files\/Westin57-93805ChevyTahoeandSuburban2015-2020HDXWinchMountGrilleBlack_2.jpg?v=1695236265"},{"product_id":"westin-57-3805-chevy-tahoe-and-suburban-2015-2020-hdx-grille-black","title":"Westin 57-3805 Chevy Tahoe and Suburban 2015-2020 HDX Grille Black","description":"\u003cp\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e: Westin\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e: 57-3805\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBumper Type\u003c\/strong\u003e: Grille\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Westin Grille Guard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2015-2020 Chevy Tahoe and Suburban\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e: Exclude models with \"Lane Departure Distance Module\"\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"Sub\"\u003eFeatures:\u003c\/h2\u003e\n\u003cul class=\"Point\"\u003e\n\u003cli\u003e2\" tube full wraparound wings provide superior strength and protection\u003c\/li\u003e\n\u003cli\u003eFull punch plate grille delivers total front-end protection\u003c\/li\u003e\n\u003cli\u003e1-1\/4\" tube wing supports enhance structural rigidity\u003c\/li\u003e\n\u003cli\u003eHeavy duty 2 3\/4\" wide upright rubber strips give an added barrier of protection\u003c\/li\u003e\n\u003cli\u003eElectrostatic base coat provides long lasting corrosion protection\u003c\/li\u003e\n\u003cli\u003eMount kit and hardware included for a complete professional installation\u003c\/li\u003e\n\u003cli\u003eWill interfere with function of front parking sensor if equipped\u003c\/li\u003e\n\u003cli\u003eWill interfere with \"Adaptive Cruise (Speed) Control\" or Forward Collision Warning Systems that feature grille mounted laser control sensors if equipped\u003c\/li\u003e\n\u003cli\u003eRemoval of tow hooks required for installation if equipped\u003c\/li\u003e\n\u003cli\u003eWill interfere with function of front parking sensor if equipped\u003c\/li\u003e\n\u003cli\u003eMinor trimming to tow hook pocket area required\u003c\/li\u003e\n\u003cli\u003eTrimming to front bumper plastic required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 class=\"Sub\"\u003eDetails:\u003c\/h2\u003e\n\u003cul class=\"Point\"\u003e\n\u003cli\u003eWeight: 104 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 85\" x 37\" x 32\"\/li\u0026gt;\u003c\/li\u003e\n\u003cli\u003eFinish: Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eMaterial: E-Coated Steel\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WESTIN","offers":[{"title":"Default Title","offer_id":40075786748022,"sku":"57-3805","price":1146.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/files\/Westin57-3805ChevyTahoeandSuburban2015-2020HDXGrilleBlack_1.jpg?v=1695226804"},{"product_id":"steelcraft-50-0405c-2021-2024-chevy-tahoe-chevy-suburban-hd-front-grille-guard","title":"Steelcraft 50-0405C 2021-2026 Chevy Tahoe \/ Chevy Suburban HD Front Grille Guard","description":"\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e: Steelcraft HD Grille Guard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e: 2021-2026 Chevy Tahoe \/ Chevy Suburban\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e Excludes High Country trim and Z71\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e: E-coated and powder coated\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003cp\u003e \u003c\/p\u003e\u003ch3\u003eHD Replacement Series\u003c\/h3\u003e\n\u003cp\u003eThe Steelcraft HD Replacement Series is designed as a full replacement front bumper built for maximum strength and dependable protection. This line focuses on heavy-duty steel construction, reinforced mounting points, and a clean, factory-style fit that integrates closely with the truck’s frame. HD Replacement Series bumpers are built for drivers who use their trucks for work, towing, or demanding environments and want added front-end protection without sacrificing fitment accuracy or functionality.\u003c\/p\u003e","brand":"Steelcraft","offers":[{"title":"Default Title","offer_id":40358254510198,"sku":"50-0405C","price":879.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/files\/Steelcraft50-0405C2021-2024ChevyTahoeChevySuburbanHDFrontGrilleGuard_1.png?v=1702058741"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/2862\/0347\/collections\/chevy-tahoe-suburban-bumpers.jpg?v=1727723159","url":"https:\/\/bumperstock.com\/collections\/chevy-tahoe-suburban.oembed?page=2","provider":"BumperStock","version":"1.0","type":"link"}