Find Your Fit
- Free Shipping
- Fitment Guaranteed
- Price Match
- Free Sales Tax
Fitment question?Ask an Expert
SaleRanch Hand FBF921BLR 1992-1996 Ford F150/F250/Bronco Legend Front Bumper
- Part # : FBF921BLR
- Material : 4" Schedule 40 Pipe and Diamond-Plate Steel
- Finish : Black Powder Coat
- Weight : 246 lb
Sale price $2,022.95 Regular price $2,427.54Unit priceFITS YOUR DOESN'T FIT YOUR 
SaleRanch Hand BBF928BLS 1981-1996 Ford F150/F250 Legend Rear Bumper
- Part # : BBF928BLS
- Material : 4" Schedule 40 Pipe and Diamond-Plate Steel
- Finish : Black Powder Coat
- Weight : 135 lb
Sale price $914.95 Regular price $1,097.94Unit priceFITS YOUR DOESN'T FIT YOUR 
SaleHammerhead 600-56-0913 Ford F150/F250/F350 1992-1996 Front Non-Winch Bumper Low Profile
- Part # : 600-56-0913
- Material : 7 Gauge Steel
- Finish : Black Textured Powder Coat
- Weight : 150 lb
Sale price $2,060.10 Regular price $2,472.12Unit priceFITS YOUR DOESN'T FIT YOUR 
SaleHammerhead 600-56-0704 Ford F150 1988-1996 Flush Mount Rear Bumper
- Part # : 600-56-0704
- Material : 0.250" Steel Plate
- Finish : Black Textured Powder Coat
- Weight : 129 lb
Sale price $1,547.10 Regular price $1,856.52Unit priceFITS YOUR DOESN'T FIT YOUR 
SaleHammerhead 600-56-0092 Ford F150 1988-1996 Rear Bumper
- Part # : 600-56-0092
- Material : 0.250" Steel Plate
- Finish : Black Textured Powder Coat
- Weight : 133 lb
Sale price $1,547.10 Regular price $1,856.52Unit priceFITS YOUR DOESN'T FIT YOUR 
SaleHammerhead 600-56-0322 Ford F150 1992-1996 Front Winch Bumper Pre-Runner
- Part # : 600-56-0322
- Material : 7 Gauge Steel
- Finish : Black Textured Powder Coat
- Weight : 140 lb
Sale price $2,060.10 Regular price $2,472.12Unit priceFITS YOUR DOESN'T FIT YOUR 
SaleHammerhead 600-56-0457 Ford F150 1992-1996 Front Winch Bumper Low Profile
- Part # : 600-56-0457
- Material : 7 Gauge Steel
- Finish : Black Textured Powder Coat
- Weight : 120 lb
Sale price $1,934.10 Regular price $2,320.92Unit priceFITS YOUR DOESN'T FIT YOUR 
SaleHammerhead 600-56-0455 Ford F150 1992-1996 Front Winch Bumper Low Profile
- Part # : 600-56-0455
- Material : 7 Gauge Steel
- Finish : Black Textured Powder Coat
- Weight : 132 lb
Sale price $1,934.10 Regular price $2,320.92Unit priceFITS YOUR DOESN'T FIT YOUR 
SaleHammerhead 600-56-0500 Ford F150 1992-1996 Front Winch Bumper with Full Brush Guard
- Part # : 600-56-0500
- Material : 7 Gauge Steel
- Finish : Black Textured Powder Coat
- Weight : 151 lb
Sale price $2,573.10 Regular price $3,087.72Unit priceFITS YOUR DOESN'T FIT YOUR 
SaleHammerhead 600-56-0067 Ford F150 1992-1996 Front Winch Bumper with Full Brush Guard
- Part # : 600-56-0067
- Material : 7 Gauge Steel
- Finish : Black Textured Powder Coat
- Weight : 151 lb
Sale price $2,573.10 Regular price $3,087.72Unit priceFITS YOUR DOESN'T FIT YOUR
How to Choose a Bumper for Your 1992-1996 Ford F150
Decide on winch-readiness, brushguard integration, and bumper weight for your 1992-1996 Ford F150. Each tier delivers a different build.
Most affordable: Hammerhead 600-56-0457 Low Profile Winch Front at $1,934.10. Hammerhead's Low Profile uses 7-gauge American steel construction. 120 lbs, black textured powder coat, winch-ready, no brushguard. If your truck has front leaf springs, contact us before ordering for the leaf-spring mount kit.
Schedule 40 pipe and diamond plate: Ranch Hand FBF921BLR Legend Front Bumper at $2,022.95. Ranch Hand uprights run 25% thicker and pipe 90% thicker than competitors. 246 lbs, black powder coat. Fits the OBS chassis across F150, F250, and 1992-1996 Bronco.
Top-tier: Hammerhead 600-56-0067 Winch Bumper with Full Brush Guard at $2,573.10. Hammerhead applies Hol-Mac heavy-equipment fabrication to truck bumpers. 7-gauge steel, 151 lbs, black textured powder coat, winch-ready with full brushguard.
Bolt-on across all three. Beyond these picks, Hammerhead 600-56-0322 pre-runner winch and 600-56-0913 non-winch low-profile fronts fill the front lineup. Rears include Hammerhead 600-56-0092, flush-mount 600-56-0704, and the value Ranch Hand BBF928BLS Horizon at $914.95.
What Fits Your 1992-1996 Ford F150
Bumpers here cover the 9th-gen Ford F150 (Aeronose / OBS), 1992 through 1996, a second redesign of the 1980 F-Series architecture. The 1992-1996 Bronco shares the chassis, so the FBF921BLR Legend front fits F150, F250, and Bronco.
Factory parking sensors were not equipped on 9th-gen F150 trucks. Aftermarket bumpers do not need sensor cutouts. Sensor questions only come up when a previous owner added a kit.
The 10th-gen 1997-2003 F150 sits on a different platform; 1997+ bumpers do not bolt to OBS trucks. Backward, the 8th-gen 1987-1991 used the same architecture but front fascia differs; rear bumpers like Hammerhead 600-56-0092 (1988-1996) and Ranch Hand BBF928BLS (1981-1996) cross backward, while 1992-1996 fronts do not.
Other Ford F150 generations? See the full Ford F150 bumper lineup.
Frequently Asked Questions
Will a bumper made for the 1992-1996 Ford F150 fit the F250 or Bronco of the same year?
Some bumpers cover all three. The Ranch Hand FBF921BLR Legend Front fits F150, F250, and 1992-1996 Bronco on the OBS chassis. The Hammerhead 600-56-0913 low-profile non-winch front covers F150, F250, and F350. Each listing specifies the exact fitment range; verify before ordering.
Can I keep my factory fog lights when installing this bumper on a 1992-1996 F150?
It depends on the bumper style. Low-profile fronts like Hammerhead 600-56-0457 leave the lower fascia clean, so factory fog lights mounted in the OEM bumper end up removed with the OEM unit. Brushguard styles often add light tabs but do not relocate factory fogs. Each listing notes light-mounting options.
Is this a true bolt-on for a 1992-1996 Ford F150, or do I need to drill, cut, or weld?
All current picks bolt to factory mounts on coil-sprung 1992-1996 F150s. If your truck has front leaf springs, the Hammerhead 600-56-0455 and 600-56-0913 listings note a leaf-spring mount kit (part 600-56-0718) is required. No cutting, drilling, or welding on standard OBS trucks.
