How to Choose a Bumper for Your 2004-2008 Ford F150
Decide first on winch-readiness, light integration, and sensor compatibility for your 2004-2008 Ford F150. Each tier answers those differently.
Most affordable: Frontier 600-10-6005 Xtreme Front Bumper at $1,632.03. Frontier brings handcrafted construction with classic diamond plate styling. 136 lbs, Heavy Duty Steel, black powder coat. Fits 2006-2008 post-facelift; sibling SKU 600-10-4005 covers 2004-2005.
Mid-tier: Hammerhead 600-56-0542 Pre-Runner Non-Winch Front at $1,905.30. Hammerhead builds aftermarket bumpers in Bay Springs, Mississippi. 154 lbs, 7-gauge steel, black textured powder coat. Pre-runner uprights, no winch tray, single SKU for all 2004-2008.
Top-tier: Hammerhead 600-56-0124 Pre-Runner Winch Front at $2,060.10. Hammerhead offers daily stock list updates from the manufacturer. 190 lbs, 7-gauge steel, black textured powder coat. Pre-runner uprights with winch tray, single SKU for all 2004-2008.
Bolt-on across all three. Beyond these picks, the catalog also stocks Frontier Original 300-10 diamond-plate fronts, Westin HDX grille guards in black or stainless, Steelcraft and TrailFX rear bumpers, and the Ranch Hand Legend grille guard.
What Fits Your 2004-2008 Ford F150
This page covers the 11th-gen Ford F150 on the P221 platform, 2004 through 2008. The fully-boxed frame and triple-slot grille launched as the 2004 model. A 2006 mid-cycle facelift split front SKUs into 2004-2005 and 2006-2008 sub-ranges.
Reverse Sensing System rear parking sensors were optional on Lariat, FX4, and Harley-Davidson trims (2005-2007). No factory front sensors. Front bumpers face no sensor concerns; Hammerhead 600-56-0180 and 600-56-0477 are the rear SKUs that retain factory cutouts.
Forward of 2008, the 12th-gen P415 brought new mounting and does not interchange. The earlier 10th-gen (1997-2003) used a different platform; the 2004 Heritage edition kept that body one year only. From what we've seen, the 2006 facelift trips up more buyers than the gen boundaries.
Other Ford F150 years? Ford F150 bumpers, every fitment.
Frequently Asked Questions
Does this bumper fit both 2WD and 4WD versions of my 2004-2008 Ford F150?
Yes for the front bumpers on this page. Frontier Xtreme 600-10-4005 and 6005, plus Hammerhead 600-56-0124, 0542, and 0562, bolt to standard 2WD and 4WD F150 frames since the IFS front geometry is shared. Body lifts and tall suspension kits can change clearance, so confirm modification notes on the listing.
Does this front bumper accept a winch on my 2004-2008 Ford F150, and what capacity?
The Hammerhead 600-56-0124 Pre-Runner Winch and 600-56-0562 Low Profile Winch both include a winch tray, with capacity stated on each product page. The Frontier Xtreme 600-10-4005 and 6005 plus Hammerhead 600-56-0542 Pre-Runner Non-Winch ship without a tray and cannot accept one as a retrofit.
What gauge and thickness of steel is used in these 2004-2008 F150 bumpers?
Frontier Xtreme 600-10-6005 uses Heavy Duty Steel at 136 lbs assembled. Both Hammerhead front picks (600-56-0542 and 600-56-0124) use 7-gauge American steel at 154 and 190 lbs respectively. Rear options run 7-gauge to 0.250-inch plate; Hammerhead 600-56-0180 and 600-56-0477 rears land at 120-135 lbs.
