Fab Fours Vengeance Bumpers for Nissan Titan

XD Only, 2016 Through 2020

Read the tailgate first. Every bumper here is a Titan XD part. The XD is the heavier Titan, on its own frame, and Fab Fours cut the Vengeance for it alone. If you drive the standard half-ton Titan, this is not your page. The full Titan collection linked at the bottom carries the rest.

Fitment runs 2016 through 2020, with no engine split. A 2017 Cummins diesel XD and a 2018 gas 5.6 take the same three part numbers. The XD itself ran through 2024, while the listings here stop at 2020, so hold your exact year against the listing before checkout.

One trim sits out. Fab Fours has confirmed the Vengeance will not mount on the Pro-4X XD, where the mounting differs. The questions below cover where that leaves you.

What "No Guard" and "Pre-Runner" Mean

Fab Fours sells the XD front bumper in two builds and names them plainly. Both share one body: 11-gauge steel under a 2-stage black powder coat, cut close to the truck, with a low center opening that feeds the radiator and clears bigger tires. On the gauge scale, thicker steel takes the smaller number, and 11-gauge is heavy plate for a bumper that rides this tight. Both builds hold a 20-inch light bar in the center and a 3-by-3 cube light on each side, all sold separately. Mesh inserts and a license plate bracket are optional extras if you want the openings closed.

No Guard means exactly that. Nothing over the grille, the whole nose left open. It is the lower and lighter of the two, the cleanest line the Vengeance draws.

Pre-Runner puts one steel tube over the grille's center and stops there. It is not a full grille guard. No steel reaches the headlights on either build. Same bumper underneath, one bar more steel on top.

The call is pure looks: No Guard for the lowest front, Pre-Runner for a framed grille. Nothing structural separates them. Neither one takes a winch, and no Vengeance does. Fab Fours points winch work at its heavier lines.

Both fronts keep the factory parking sensors, with a note straight from Fab Fours: the sensor mounts are aimed at lifted trucks. At stock height, plan to tune the mounts so the sensors read the road, not the ground.

Mounting is bolt-on, no drilling. The Vengeance is Fab Fours' lightweight steel, but a full front bumper is still a two-person lift.

Same Hitch, Same Wiring: the Rear Bumper

Towing is the first question on an XD, so here is the answer. The Vengeance rear bumper mounts around the factory receiver and keeps the wiring where Nissan put it. The trailer hooks up exactly as before.

The shape matches the fronts, the same angular 11-gauge steel in the same black coat. An opening on each side takes cube lights or a 6-inch light bar, sold separately. Cutouts hold the factory parking sensors, with the same stock-height tuning note as the front.

Blind-spot monitoring does not carry over. The rear offers no support for it, so if your XD watches the lane beside you through the bumper, that feature goes.

Freight shipping in the US costs you nothing, and every order carries the fit guarantee. Fab Fours backs the steel with a limited lifetime structural warranty. For every other brand we sell on this truck, head to the full Nissan Titan bumpers page.

Frequently Asked Questions