Find Your Fit
- Free Shipping
- Fitment Guaranteed
- Price Match
- Free Sales Tax
Fitment question?Ask an Expert
SaleFab Fours NT16-T3750-1 Nissan Titan XD 2016-2020 Black Steel Rear Bumper
- Part # : NT16-T3750-1
- Material : 14 Gauge US Steel
- Finish : 2 Stage Black Powder Coat
- Weight : 175 lb
Sale price $1,049.99 Regular price $1,259.99Unit priceFITS YOUR DOESN'T FIT YOUR Universal fit 
SaleFab Fours NT16-K3762-1 Nissan Titan XD 2016-2020 Black Steel Front Bumper Pre-Runner Guard
- Part # : NT16-K3762-1
- Material : 14 Gauge US Steel
- Finish : 2 Stage Black Powder Coat
- Weight : 250 lb
Sale price $1,669.99 Regular price $1,783.89Unit priceFITS YOUR DOESN'T FIT YOUR Universal fit 
SaleFab Fours NT16-K3761-1 Nissan Titan XD 2016-2020 Black Steel Front Bumper No Guard
- Part # : NT16-K3761-1
- Material : 14 Gauge US Steel
- Finish : 2 Stage Black Powder Coat
- Weight : 250 lb
Sale price $1,609.99 Regular price $1,718.24Unit priceFITS YOUR DOESN'T FIT YOUR Universal fit 
SaleFab Fours NT16-K3760-1 Nissan Titan XD 2016-2020 Black Steel Front Bumper Full Guard
- Part # : NT16-K3760-1
- Material : 14 Gauge US Steel
- Finish : 2 Stage Black Powder Coat
- Weight : 250 lb
Sale price $1,669.99 Regular price $2,003.99Unit priceFITS YOUR DOESN'T FIT YOUR Universal fit
The Grille and the Headlights Decide Your Front Bumper
Only one of the three puts steel in front of the headlights. That is the Full Guard. A frame rises across the grille, and a bar wraps each light. Order it when a deer strike or a brush line is a real risk where you drive.
The Pre-Runner Guard stops one step short. A single bar arcs across the grille and ends there. The headlights stay in the open. That is the answer for gravel and light brush, short of a full guard.
No Guard is the bumper by itself. That keeps the front end low, which matters if you park in a garage.
Past the guard, the three are one bumper. The tread plate face and the two-stage gloss black powder coat do not change between them. The guard is part of the bumper rather than a bolt-on, so the shape you order is the shape you keep. No front bumper here is sensor compatible, so a Titan XD with front parking sensors gives them up at that end of the truck.
Tow Hooks Are Included, Recovery Mounts Are Not
Tow hooks are the only thing Fab Fours lists as included with these front bumpers. Everything else on its accessory list carries a separate part number.
D-ring mounts are one of them. Fab Fours builds one bolt-on mount for the whole Black Steel line, cut from 3/4-inch plate, taking a 3/4-inch or 7/8-inch shackle. Recovery points are a second decision here, not something the bumper arrives with.
None of these fronts is sold winch ready, and Fab Fours publishes no winch rating for any of them. If a winch is the point of the build, the Nissan Titan page linked below has fronts that are rated for one.
Diamond Tread Plate on the Rear Bumper
There is one rear bumper here and no versions of it to sort through. It spans the full width of the truck. Diamond tread plate covers the face, under the same powder coat the fronts carry.
Your factory receiver hitch stays open at the center, and the trailer wiring is untouched. A trailer hooks up the way it always did.
The back of the truck is also where the sensors survive. Fab Fours lists this rear bumper as sensor compatible where the truck has them. The three fronts are the opposite, so the sensor answer changes with the end of the truck you are buying.
US orders ship at no charge and we guarantee the fit. The Nissan Titan bumpers page puts this line beside everything else that fits the truck. Match the front bumper to what you want covered, then add the rear.
Frequently Asked Questions
Is anything here for the half-ton Titan?
No. Every Fab Fours bumper we carry for the 2016 and newer Titan is cut for the XD, and these four parts stop at the 2020 model year. There is no half-ton version and no 2021 version. A half-ton Titan from 2017 on does have steel at BumperStock: the Steelcraft Fortis front bumper is cut for the non-XD truck, and Steelcraft rears fit it too. Both sit on the Nissan Titan bumpers page.
Can I add a guard to the No Guard bumper later?
No. Fab Fours builds the Titan XD front as three separate part numbers, and it does not sell the Pre-Runner or the Full Guard frame on its own for this truck. Pick the coverage you want at checkout. The D-ring mounts are the part you can add whenever you like, since they bolt on to any Black Steel bumper after the fact.
What do I get from Black Steel Elite instead?
The same three front shapes and the same single rear bumper, with a smooth face in place of the tread plate. Fitment is identical, the 2016 through 2020 Titan XD. If you would rather have a flat face, look at Black Steel Elite for the Titan instead.
