Hammerhead 600-56-0343 Ford F150 2009-2014 Front Winch Bumper with Full Brush Guard

Name: Hammerhead 600-56-0343 Ford F150 2009-2014 Front Winch Bumper with Full Brush Guard
Brand: Hammerhead
SKU: 600-56-0343
Price: 2573.1 USD
Availability: InStock

SKU 600-56-0343

FITMENT CONFIRMED

CONFIRMED FIT FOR

SHOW BUMPERS FOR YOUR TRUCK

CONFIRM IT FITS YOUR TRUCK

$2,573.10 $3,087.72 SAVE $514.62

Bolt-on install using factory bolt locations

Full brush guard

7-gauge steel · 229 lbs · Textured black powder coat

30-day hassle-free returns

PAY OVER TIME WITH BREAD

0% APR available. Prequalifying will not affect your credit.

Price Match

Free Shipping

Authorized Dealer

Talk to a bumper expert

Ask Tyler

844-827-4442

Mon-Fri: 9am-6pm EST

Real truck enthusiasts. Not a call center.

Free freight shipping. Carrier schedules delivery at a time that works for you.

$2,573.10$3,087.72

Product details

Full specifications

Style: Hammerhead X-Series Full Brushguard Front Bumper
Brand: Hammerhead
Vehicle Fit: 2009-2014 Ford F150
Fitment Notes: Due to the vast variety of offerings and sizes of aftermarket fender flares, we cannot guarantee that the outer tubes of our full brush guard bumpers will allow for over-sized fender flares to be installed on a vehicle.
Weight: 229 lbs
Dimensions (L x W x H): 90 x 42 x 44 in
Steel Material: 7 Gauge, 1.25 Inch X 0.12 Inch Wall Tubing Frame
Finish: Textured Black Powder Coat

Front bumper

Mounting hardware kit

Install instructions

3-5

HOURS

PEOPLE

Bolt-on

METHOD

No guessing. The mounting hardware's in the box, and it lines up on your truck's factory mounts. It ships freight and it's heavy, so clear a spot for it.

Download installation PDF

"Bolted up clean. Sensors and fogs plugged right back in." — Caleb Haymes, verified buyer

Hammerhead backs every bumper with a one-year limited warranty against manufacturing defects, from the date of purchase. The remedy is repair or replacement, and the warranty is non-transferable.

Read full Hammerhead warranty terms

Covered by the Magnuson-Moss Warranty Act. Buying from an authorized dealer keeps your full coverage intact.

Hammerhead Front Bumper 600-56-0343

Features:

Hammerhead's front bumpers are designed to be winch capable and stand up to the punishment of on-road and off-road driving.
This front bumper accommodates up to four 3.25" x 3.25" external dimension cube after-market off-road fog lights.
They are made with 7-gauge steel and are reinforced to allow for extra strength while keeping the bumpers as light as possible.
The shackle mounts are a part of the mounting surface to the frame, extending through the bumper, and are welded on the inside and outside of the bumper.
The x-series style brushguard is made with 1.75" x 0.120" wall tubing.
Hammerhead Armor prides itself on the fit and finish of every product that we offer. However, due to the vast variety of offerings and sizes of after-market fender flares, we cannot guarantee that the outer tubes of our Full Brush Guard bumpers will allow for oversized fender flares to be installed on a vehicle. Always be sure to test fit our products to verify fitment with another manufacturer's product before the final installation.

Hammerhead 600-56-0343 Ford F150 2009-2014 Front Winch Bumper with Full Brush Guard

The full brush guard carries an upper hoop over the grille and wing bars out across both headlights. It is the widest guard Hammerhead offers on a replacement bumper. This is the build for brush, livestock roads and deer at dusk, where a strike does not land neatly in the center. All of them take a winch, with the plate behind the center face, on 7-gauge steel and factory mounting points. Your part number's fitment notes carry the exceptions: aftermarket fender flares can crowd the outer tubes, and on some trucks the guard blocks adaptive cruise.

TUBES ACROSS THE HEADLIGHTS

Wing bars run past the grille to both corners

ALL OF THEM TAKE A WINCH

The plate sits behind the center face

WIDEST HAMMERHEAD GUARD

Across their replacement bumper line

NOTES TO READ

Fender flare clearance, and adaptive cruise on some trucks

Hammerhead Front Bumper 600-56-0343

Features:

Hammerhead's front bumpers are designed to be winch capable and stand up to the punishment of on-road and off-road driving.
This front bumper accommodates up to four 3.25" x 3.25" external dimension cube after-market off-road fog lights.
They are made with 7-gauge steel and are reinforced to allow for extra strength while keeping the bumpers as light as possible.
The shackle mounts are a part of the mounting surface to the frame, extending through the bumper, and are welded on the inside and outside of the bumper.
The x-series style brushguard is made with 1.75" x 0.120" wall tubing.
Hammerhead Armor prides itself on the fit and finish of every product that we offer. However, due to the vast variety of offerings and sizes of after-market fender flares, we cannot guarantee that the outer tubes of our Full Brush Guard bumpers will allow for oversized fender flares to be installed on a vehicle. Always be sure to test fit our products to verify fitment with another manufacturer's product before the final installation.