Hammerhead 600-56-0999 GMC Sierra 1500 2019-2021 Front Non-Winch Bumper Pre-Runner

Name: Hammerhead 600-56-0999 GMC Sierra 1500 2019-2021 Front Non-Winch Bumper Pre-Runner
Brand: Hammerhead
SKU: 600-56-0999
Price: 1905.3 USD
Availability: InStock

SKU 600-56-0999

FITMENT CONFIRMED

CONFIRMED FIT FOR

SHOW BUMPERS FOR YOUR TRUCK

Not vehicle specific

Universal fit

CONFIRM IT FITS YOUR TRUCK

$1,905.30 $2,286.36 SAVE $381.06

Bolt-on install using factory bolt locations

Pre-runner guard

7-gauge steel · 225 lbs · Textured black powder coat

30-day hassle-free returns

PAY OVER TIME WITH BREAD

0% APR available. Prequalifying will not affect your credit.

Price Match

Free Shipping

Authorized Dealer

Talk to a bumper expert

Ask Tyler

844-827-4442

Mon-Fri: 9am-6pm EST

Real truck enthusiasts. Not a call center.

Free freight shipping. Carrier schedules delivery at a time that works for you.

$1,905.30$2,286.36

Product details

Full specifications

Style: Hammerhead Pre-Runner Front Bumper
Brand: Hammerhead
Vehicle Fit: 2019-2021 GMC Sierra 1500
Fitment Notes: THIS BUMPER DOES NOT WORK WITH ADAPTIVE CRUISE. DOES NOT FIT 3.0 L DIESEL MOTOR. This bumper will NOT accommodate a front receiver hitch.
Weight: 225 lbs.
Dimensions (L x W x H): 90 x 42 x 44 in
Steel Material: 7 Gauge, 1.25 Inch X 0.12 Inch Wall Tubing Frame
Finish: Textured Black Powder Coat

Front bumper

Mounting hardware kit

Install instructions

3-5

HOURS

PEOPLE

Bolt-on

METHOD

No guessing. The mounting hardware's in the box, and it lines up on your truck's factory mounts. It ships freight and it's heavy, so clear a spot for it.

Download installation PDF

"Bolted up clean. Sensors and fogs plugged right back in." — Caleb Haymes, verified buyer

Hammerhead backs every bumper with a one-year limited warranty against manufacturing defects, from the date of purchase. The remedy is repair or replacement, and the warranty is non-transferable.

Read full Hammerhead warranty terms

Covered by the Magnuson-Moss Warranty Act. Buying from an authorized dealer keeps your full coverage intact.

Hammerhead Front Bumper 600-56-0999

Features:

Designed to stand up to the punishment of on-road and off-road driving
Accommodates up to four 3.25″ x 3.25″ external dimension cube after-market off-road fog lights, as well as lights on the pre-runner bar and a 20″ light bar in the center of the bumper
Reinforced to allow for extra strength while keeping the bumper as light as possible
The 0.750″ thick shackle mounts are a part of the mounting surface to the frame, extending through the bumper, and are welded on the inside and outside of the bumper
The pre-runner brush guard is made with 1.75″ x 0.120″ wall tubing
Will accommodate the front factory sensors
Will NOT accommodate a winch or front receiver hitch

Pre-Runner

The Hammerhead Pre-Runner Series is designed to deliver aggressive off-road styling with added protection for trucks used for off-road and trail driving. Featuring a distinctive tubular guard design and reinforced steel construction, Pre-Runner bumpers offer added durability while maintaining a lighter, high-clearance structure.

A Pre-Runner is a single tube hoop across the grille. It covers the spot where a deer strike or a low branch usually lands. Your headlights stay open and the truck keeps its width. Under the hoop the bumper is 7-gauge steel, about 0.18 inch, on factory mounting points. On most fitments the center is cut for a 20-inch light bar, with 4 cube positions in the wings, and the lights themselves are a separate buy. This one takes no winch and no front receiver hitch.

SINGLE TUBE HOOP

Across the grille, headlights left open

NARROWER THAN A FULL GUARD

Cover where strikes land, without the extra width

LIGHT BAR OPENING

Center cut for a 20-inch bar on most fitments

RECOVERY IS THE TRADE

Take the winch-capable Pre-Runner if you need it

Hammerhead Front Bumper 600-56-0999

Features:

Designed to stand up to the punishment of on-road and off-road driving
Accommodates up to four 3.25″ x 3.25″ external dimension cube after-market off-road fog lights, as well as lights on the pre-runner bar and a 20″ light bar in the center of the bumper
Reinforced to allow for extra strength while keeping the bumper as light as possible
The 0.750″ thick shackle mounts are a part of the mounting surface to the frame, extending through the bumper, and are welded on the inside and outside of the bumper
The pre-runner brush guard is made with 1.75″ x 0.120″ wall tubing
Will accommodate the front factory sensors
Will NOT accommodate a winch or front receiver hitch